It'll go sideways on a trailer if you pop the bed off and prop it up against the rollbar. I don't use the tilt bed function so I yanked the two struts off and chunked them in the back of the shop. Factory wiring harness has too damn many wires to deal with so I wired in a flat-four trailer plug into the factory harness before the split for the two taillights. Then just pull the pins on the hinges, tilt it up against the rollbar with the tailgate facing upwards to avoid damage and wrap a ratchet strap around the bed and cage. My gooseneck is 8 1/2' wide ... and the Teryx is now ALMOST a legal fit.
Ain't got pulled over yet though.
BTW ... gotta 5X10 also that it fits on.
