Want an easy 3 REAL HP? - Kawasaki Teryx Forum
DASA Racing DASA Racing - Riverside, CA - 619-840-7148

 1Likes
 
LinkBack Thread Tools Display Modes
post #1 of 41 (permalink) Old 05-22-2010, 04:14 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Want an easy 3 REAL HP?

We just got back from dyno testing our 2010 teryx again. The car has Dasa pipes, Dasa billet overdrive cover and an MSD ignition NOW. We added our Dasa racing throttle bodies and saw a 3HP gain ..... This is not just at peak. The car responded better, pulled harder and pulled longer. The throttle bodies WAKE THIS CAR UP. This is the TRUE BOLT ON performance package. The performance is now amazing. We have 2 SETS of these throttle bodies instock and ready to ship ....... $450.00 ..... PM me for any details.
DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE

Last edited by DASARACING; 05-22-2010 at 07:38 PM.
DASARACING is offline  
Sponsored Links
Advertisement
 
post #2 of 41 (permalink) Old 05-22-2010, 07:38 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
OHHHHH YEAH ...... i also have the MSD map ready for this setup. So it is as easy as 1-2-3

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #3 of 41 (permalink) Old 05-23-2010, 05:58 PM
 
qmurder24's Avatar
 
Join Date: May 2008
Posts: 44
coooool! how is the install?
qmurder24 is offline  
Sponsored Links
Advertisement
 
post #4 of 41 (permalink) Old 05-23-2010, 06:03 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
SIMPLE ....... pull your old ones off and put on the new ones. Give me a call i can go over it with you.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #5 of 41 (permalink) Old 05-24-2010, 01:11 AM
Premium Member
 
Dune Patrol's Avatar
 
Join Date: Sep 2008
Location: Riverside CA
Posts: 1,246
Do you have maps with and with out quiet cores?

2010 green sport. Xmf 2 seat radius cage. Cognito BOC Tower LT, Induced fab doors, Beard super T1 seats, A bunch of DASA stuff. and a whole mess of other stuff.
Dune Patrol is offline  
post #6 of 41 (permalink) Old 05-24-2010, 06:30 AM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by Dune Patrol View Post
Do you have maps with and with out quiet cores?

Yes i do .......

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #7 of 41 (permalink) Old 05-24-2010, 05:34 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
DASARACING is offline  
post #8 of 41 (permalink) Old 05-25-2010, 09:57 PM
 
minijeep's Avatar
 
Join Date: Jan 2010
Location: san diego
Posts: 463
CA

Dude I just got them on and they are bitchin!!!!! they were super easy to install and give me that something extra I was lookin for. Between your pipes, msd program, Throttle body's, OD plate and filter kit I have increased performance by almost 40% with bolt on part!!!!!!!!

Thanks Steve! you have never lead me down the wrong path.
minijeep is offline  
post #9 of 41 (permalink) Old 06-04-2010, 05:56 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
New batch of throttle bodies finished up today .... PM me for the best go-fast parts at the BEST PRICES.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #10 of 41 (permalink) Old 06-04-2010, 08:15 PM
 
ruonedge's Avatar
 
Join Date: Mar 2009
Location: Surprise, AZ
Posts: 128
C'mon DASA

Ok DASA,

You guys are killing me. I ordered pipes, intake, quiet cores.


Now throttle bodies? Do I need injectors? Since I have it apart, I think I need them? Hmmm. Cut me a deal?



The 840 kit will be back to me in a week or two. All I have to say is I better move up China Wall with no problem when I get this thing back together.

09 Teryx Sport, VFJ Stage 3, MSD, FST 840, Stage 3CAMs, DASA TB's/Injectors, DASA Pipes/Intake, CBR Stage II kit, XMF Cage and bed delete, Rugged RRP660, Rigid 10".
Saving for FOX boc LT
ruonedge is offline  
post #11 of 41 (permalink) Old 06-04-2010, 08:23 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by ruonedge View Post
Ok DASA,You guys are killing me. I ordered pipes, intake, quiet cores Now throttle bodies?.
Yeah ... Throttle bodies are the most IMPORTANT mod. These things bring the Fuel Injectected Teryx TO LIFE

Quote:
Originally Posted by ruonedge View Post
Do I need injectors? .
If you only have a pipe, MSD and clutch you DO NOT need injectors. If you go to an 840 or Standard bore kit .... You will need injectors.

Quote:
Originally Posted by ruonedge View Post
Since I have it apart, I think I need them? .
DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE

YES ... you nee dthem if you want the 6 HP on your 840 build that these throttle bodies make.

Quote:
Originally Posted by ruonedge View Post
Hmmm. Cut me a deal?.
Ofcourse ..... PM SENT

Quote:
Originally Posted by ruonedge View Post
The 840 kit will be back to me in a week or two. All I have to say is I better move up China Wall with no problem when I get this thing back together.
Your car will be a WHOLE NEW ANIMAL
DASARACING is offline  
post #12 of 41 (permalink) Old 06-05-2010, 02:13 AM
Premium Member
 
Darkjuju's Avatar
 
Join Date: Nov 2008
Location: Phoenix Arizona
Posts: 510
stock 09 here (clutched), do i need the msd to realize the gain? I am thinking i will put my money towards these throttle bodies instead.

Don't spread my wealth, spread my work ethic !!!

09' Monster Edition
Custom Induced Fabrication 4 Seat Cage
B&S Sand Seats
Crow 4 point Harnesses
Rigid HID Conversion Kit
Delorme GPS
Darkjuju is offline  
post #13 of 41 (permalink) Old 06-05-2010, 02:53 AM
Premium Member
 
Dune Patrol's Avatar
 
Join Date: Sep 2008
Location: Riverside CA
Posts: 1,246
MSD first because your going to need to reprogram the fuel curves to take advantage of the throttle bodies.

2010 green sport. Xmf 2 seat radius cage. Cognito BOC Tower LT, Induced fab doors, Beard super T1 seats, A bunch of DASA stuff. and a whole mess of other stuff.
Dune Patrol is offline  
post #14 of 41 (permalink) Old 06-05-2010, 07:20 AM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by Darkjuju View Post
stock 09 here (clutched), do i need the msd to realize the gain? .
MSD is the first mod .......

Quote:
Originally Posted by Darkjuju View Post
I am thinking i will put my money towards these throttle bodies instead.
Get the MSD and throttle bodies and your teryx will run like a raped ape

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #15 of 41 (permalink) Old 06-05-2010, 02:28 PM
 
Brettrown's Avatar
 
Join Date: Apr 2008
Location: Prescott
Posts: 164
Quote:
Originally Posted by DASARACING View Post
MSD is the first mod .......



Get the MSD and throttle bodies and your teryx will run like a raped ape

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
I have a MSD, Muzzy std w/ whisper cores, Dalton clutch and od. I run your # 4 map. Runs Good, little rich. What kind of difference will your throttle bodies
make with this combo? Will I need a different MAP?
Brettrown is offline  
post #16 of 41 (permalink) Old 06-05-2010, 05:50 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by Brettrown View Post
I have a MSD, Muzzy std w/ whisper cores, Dalton clutch and od. I run your # 4 map. Runs Good, little rich. What kind of difference will your throttle bodies make with this combo? ?
3HP across the board. This is the same testing i just did no my car and the increases were HUGE. My 2010 has Dasa pipes, MSD, Dasa billet over drive cover and now the Dasa throttle bodies. It has better throttle response, More HP, Better aceleration, revs out further and pulls harder all over.

Quote:
Originally Posted by Brettrown View Post
Will I need a different MAP?
Yes .... and i have one for you. PM me and i will get you hooked up.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #17 of 41 (permalink) Old 06-05-2010, 08:09 PM
 
Brettrown's Avatar
 
Join Date: Apr 2008
Location: Prescott
Posts: 164
Quote:
Originally Posted by DASARACING View Post
3HP across the board. This is the same testing i just did no my car and the increases were HUGE. My 2010 has Dasa pipes, MSD, Dasa billet over drive cover and now the Dasa throttle bodies. It has better throttle response, More HP, Better aceleration, revs out further and pulls harder all over.



Yes .... and i have one for you. PM me and i will get you hooked up.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
Thank You...
PM Sent
Brettrown is offline  
post #18 of 41 (permalink) Old 06-05-2010, 10:27 PM
Premium Member
 
Darkjuju's Avatar
 
Join Date: Nov 2008
Location: Phoenix Arizona
Posts: 510
AZ

Please pm me a package deal with the msd and throttle body's.

Don't spread my wealth, spread my work ethic !!!

09' Monster Edition
Custom Induced Fabrication 4 Seat Cage
B&S Sand Seats
Crow 4 point Harnesses
Rigid HID Conversion Kit
Delorme GPS
Darkjuju is offline  
post #19 of 41 (permalink) Old 06-06-2010, 06:30 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by Brettrown View Post
Thank You...
PM Sent
PM REPLIED ......

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #20 of 41 (permalink) Old 06-10-2010, 08:10 PM
 
Brettrown's Avatar
 
Join Date: Apr 2008
Location: Prescott
Posts: 164
Do you need to do anything to the stock intake ports to see these results?
Brettrown is offline  
post #21 of 41 (permalink) Old 06-17-2010, 08:32 PM
 
Brettrown's Avatar
 
Join Date: Apr 2008
Location: Prescott
Posts: 164
Quote:
Originally Posted by Brettrown View Post
Do you need to do anything to the stock intake ports to see these results?
Anyone have experience with DASA TB's on a stock motor?
Brettrown is offline  
post #22 of 41 (permalink) Old 06-17-2010, 10:03 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
Quote:
Originally Posted by Brettrown View Post
Do you need to do anything to the stock intake ports to see these results?

NOPE ..... just bolt them on ..... download our map and you are off the the races. Easy bolt on Dasa HP.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
post #23 of 41 (permalink) Old 09-21-2010, 08:50 PM
 
Join Date: Aug 2009
Location: in the 623
Posts: 126
Quote:
Originally Posted by Brettrown View Post
Anyone have experience with DASA TB's on a stock motor?
if you do what dasa recomends you will not be dissapointed having only bolt ons and worry free performance on my brnd new 09 i did exhaust,msd,filter and od plate. this monster runs great like he said (even a bit better) and i plan on doing the t-body kit next.
thanks dasa
sean is offline  
post #24 of 41 (permalink) Old 09-21-2010, 09:47 PM
Banned
 
Join Date: Jun 2010
Location: north oc
Posts: 236
i have muzzys std 750 stock and msd and vforce and am making a 4" stainless intake with bed delete might as well put filter back their in the cool fresh air so i know i will need dyno time if i add these but it will flow like a mother (say hi to dan for me ) hay steve what size did you go to on these ?

Last edited by v8jeep86; 09-22-2010 at 12:02 AM.
v8jeep86 is offline  
post #25 of 41 (permalink) Old 10-25-2010, 07:26 PM Thread Starter
 
Join Date: Apr 2009
Location: California
Posts: 2,400
These are 38mm and with these simple bolt on mods your stock teryx will haul the mail .....

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
DASARACING is offline  
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome