I put a Dynatek CDI on my Teryx and the motor has a slight miss when motor is not warmed up. After motor is warmed up the miss goes away. Anyone else see this on theirs?

Slightly lean jetting, the hotter spark magnify's this condition

Come to think of it...yes mine does that to. I will be putting Hunterwork jet kit. I'll note if it clears it up.

I got the dynatek box started mixing two gallons of vp 110 when i fill up, runs colder and stronger.

whoops wrong thread sorry

Sorry what is VP 110 and mixing 2 gallons?

please explain??

Are you just adding 2 gallons of High Octane fuel?

I had the same missing problem. I have the dynatec programable CDI, dynajet kit, and muzzys... I lifted the needle by 1 washer position (instructions called for both washers on top of the clip, I put one on top and 1 on bottom). This is all but cured the problem. I still think I have a SLIGHT miss, not sure, but if I were to do it over again, I might put both washers on bottom.

Scott...

after installing my cdi box from dragonfire I have noticed a missfire much like others have mentioned, I have order some coils from dynatek (hotter spark)
will post results soon.