 |
 |
|
|
| Engine For discussion of engine performance, and maintenance |
Welcome to Teryx Forums.net - the ultimate Kawasaki Teryx related forum and discussion board!
You are currently viewing our forums as a guest which means you are missing out on member discounts and rides! By joining our Kawasaki Teryx forums you will get REWARDS like discounts on Teryx parts and invitations to side x side events! Registration is fast, and simple, so please, REGISTER for FREE now!
|
06-23-2008, 06:51 PM
|
 |
|
|
First Name: Jason
My Teryx: 08 NRA
Join Date: Jun 2008
Location: Colorado
Posts: 5
|
|
jet kit
I installed a dynatek box and open air intake. I also ordered the jet kit from dragonfire and it says to locate fuel mixture screw to proceed with adjustment procedure. With 5/32 drill bit provided carefully drill through the plug. Note the fuel mixture screw is directly beneath the plug, be ready to pull back on the drill the instant you break through. Use the screw provided to secure and remove this plug. Carefully turn the mixture screw clockwise until lightly seated, then 1.5 turns out above 5,000 feet. Has anyone done this and have more explanation on it? I am confused about this step and the purpose of it? Thanks
|
06-23-2008, 07:13 PM
|
|
Official Site Vendor
|
|
First Name: Johnny
My Teryx: 103 B.C.
Join Date: Jan 2008
Location: Arizona
Posts: 391
|
|
whats your question? I think they richen the mixture kinda like puttin in a bigger pilot jet
__________________
WWW.UTVCRAP.com Phoenix Az 623-934-3070
www.UTVCRAP.com, Rhino Crap, RZR Crap, RhinoCrap.com & RZRCrap.com are in no way, shape, or form affiliated with the Yamaha Motor Company, Polaris Industries or Kawasaki. We are not a direct Yamaha, Kawasaki, Polaris Dealer or Distributor - We merely sell crap for a Yamaha Rhino, Polaris RZR and Ranger and Kawasaki Teryx.
|
06-23-2008, 07:45 PM
|
|
|
|
First Name: Jason
My Teryx: 08 NRA
Join Date: Jun 2008
Location: Colorado
Posts: 5
|
|
jet kit
Does it sound right to drill that out and run the screw in without threading the hole?
|
06-23-2008, 08:10 PM
|
|
Official Site Vendor
|
|
First Name: Johnny
My Teryx: 103 B.C.
Join Date: Jan 2008
Location: Arizona
Posts: 391
|
|
under the cap there is a screw already you are going to pull the cap off sometimes they come off when drilling sometime you have to use a screw threaded into the cap to pull the Cap off the you will see the screw understand ??
__________________
WWW.UTVCRAP.com Phoenix Az 623-934-3070
www.UTVCRAP.com, Rhino Crap, RZR Crap, RhinoCrap.com & RZRCrap.com are in no way, shape, or form affiliated with the Yamaha Motor Company, Polaris Industries or Kawasaki. We are not a direct Yamaha, Kawasaki, Polaris Dealer or Distributor - We merely sell crap for a Yamaha Rhino, Polaris RZR and Ranger and Kawasaki Teryx.
|
06-23-2008, 08:29 PM
|
|
|
|
First Name: Jason
My Teryx: 08 NRA
Join Date: Jun 2008
Location: Colorado
Posts: 5
|
|
That helps, thank you. I will be putting it in tomorrow so I will see how it goes. Also nice video you put up. I do alot of riding above 9,000-10,000 feet and stock my Teryx will only go 35mph so I am trying to get a little more power goin.
|
06-23-2008, 08:54 PM
|
|
Official Site Vendor
|
|
First Name: Johnny
My Teryx: 103 B.C.
Join Date: Jan 2008
Location: Arizona
Posts: 391
|
|
put the dynatek box in
__________________
WWW.UTVCRAP.com Phoenix Az 623-934-3070
www.UTVCRAP.com, Rhino Crap, RZR Crap, RhinoCrap.com & RZRCrap.com are in no way, shape, or form affiliated with the Yamaha Motor Company, Polaris Industries or Kawasaki. We are not a direct Yamaha, Kawasaki, Polaris Dealer or Distributor - We merely sell crap for a Yamaha Rhino, Polaris RZR and Ranger and Kawasaki Teryx.
|
LinkBacks (?)
LinkBack to this Thread: http://www.teryxforums.net/engine/1127-jet-kit.html
|
| Posted By |
For |
Type |
Date |
| TeryxForums.net |
This thread |
Refback |
06-23-2008 07:10 PM |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 04:16 AM.
Powered by vBulletin® Version 3.6.8 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0 vB.Sponsors
Copyright 2008 BrianSquared LLC
RhinoForums.net, RZRforums.net, TeryxForums.net, RedlineUTVforums.net and BrianSquared LLC are in no way affiliated
with or endorsed by the Yamaha Motor Company, Polaris Industries, Kawasaki Motor Corporation or Redline Performance Products.
We are not a direct Yamaha, Kawasaki, Polaris, Redline Dealer or Distributor.
|
|
|
 |
