Mounting the MSD

minijeep · #31 (**permalink**) 01-24-2010, 07:58 PM

very nice, I think that I will do the clutch next week

2Txns · #32 (**permalink**) 01-24-2010, 08:29 PM

Quote:

Originally Posted by Ali Baba

Just threw a MSD on mine today. DASA hooked me up with setting up the Maps. Drove it down the street and noticed a considerable difference in acceleration and reached 58mph on a completely stock car in a 1/8 mile. I pretty pleased with that. Thanks DASA. Next I'm doing a Dalton Clutch and OD Clutch cap and DASA pipes. We'll see what kind of MPH's I get then.

Maybe I should download that map, too.

**Ali Baba** · #33 (**permalink**) 01-24-2010, 08:48 PM

Quote:

Originally Posted by minijeep

very nice, I think that I will do the clutch next week

Yeah! and while you're in there you should put that OD clutch cap on. It will drop your RPM's and give you a little more speed (2-4mph) Call me when you get into it. BTW's did you get my texts?

minijeep · #34 (**permalink**) 01-26-2010, 03:05 AM

Quote:

Originally Posted by Ali Baba

Yeah! and while you're in there you should put that OD clutch cap on. It will drop your RPM's and give you a little more speed (2-4mph) Call me when you get into it. BTW's did you get my texts?

will see son that is just more money. I did get you text sorry, I haven't been feeling all that great the last two days.

**Ali Baba** · #35 (**permalink**) 01-26-2010, 08:21 AM

Quote:

Originally Posted by minijeep

will see son that is just more money. I did get you text sorry, I haven't been feeling all that great the last two days.

No worries. I'm home sick with the flu today. This sucks. Well Dragonfire has the OD cap for $36 right now. (pretty cheap) Although I think there is a core charge and then you get a refund in the end.

minijeep · #36 (**permalink**) 01-26-2010, 02:06 PM

I saw that I sent Dasa a PM about clutch, OD plate and KEBC cover so will see. hope you feel better

dustymoore · #37 (**permalink**) 01-29-2010, 09:15 PM

i installed the msd and a set of muzzys. my exhaust glows bright orange at anything above idle on all msd settings. anybody else had this trouble?

**Apexmedic** · #38 (**permalink**) 01-29-2010, 09:22 PM

Quote:

Originally Posted by dustymoore

i installed the msd and a set of muzzys. my exhaust glows bright orange at anything above idle on all msd settings. anybody else had this trouble?

I havent noticed that on mine... but I have DASA pipes. Where are they glowing orange? Also searchthe forums, I have heard something about muzzys needing to have exhaust wraps on them and some muzzys coming apart from getting to hot.

dustymoore · #39 (**permalink**) 02-01-2010, 09:45 AM

They start to glow right where they exit the motor and I can see it glowing at the joints where the exhaust goes together. I cant see the rest of the pipe because I installed the exhaust wrap. I got a response from the vendor that sold me both items. He said that it is normal for stainless exhaust to glow orange and that there is nothing wrong. I ran it pretty hard this weekend in the snow and boiled the water. I have ran it harder than that stock and never boiled the water. Any thoughts are appreciated. Ive never had a fuel injected bike before so I am in the dark.

**Apexmedic** · #40 (**permalink**) 02-01-2010, 10:05 AM

Check your gasket, where your pipes meet your header. If they are paper they can be blown. Order some copper ones. I just did. from CB motor sports part number 1882. They are 10 bucks for 4.

**wolfman** · #41 (**permalink**) 02-17-2010, 10:51 PM

You might be running a little lean on your air/fuel ratio. It can cause overheating.
Wolfman

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Mounting the MSD

teryx msd installation

how to install teryx msd

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)