Teryx snow plow - Kawasaki Teryx Forum
General Teryx Discussion For General Teryx talk. If it's about Teryx's and does not fall into another category, it belongs here!

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 45 (permalink) Old 10-10-2008, 06:12 PM Thread Starter
 
Join Date: Jun 2008
Posts: 8
Thumbs up Teryx snow plow

Hi i just got my egale snow plow from hunterworks it looks like it will do well this winter i was just wondering if anybody else makes a plow for the teryx?
048teryxx048 is offline  
Sponsored Links
Advertisement
 
post #2 of 45 (permalink) Old 10-11-2008, 10:26 AM
 
Join Date: Sep 2008
Posts: 45
you got any pics ??

i would like some ideas for when i build one for dads teryx
leroycool1 is offline  
post #3 of 45 (permalink) Old 12-03-2008, 06:28 PM
 
Join Date: Nov 2008
Posts: 17
I Have A Plow From Hunter Works Also Works Great. The Only Problem Is The Mount Is So Low For My Trails I Have Bent It Twice I Just Made A Quick Disconnect For It Just Ran Longer Bolts From The Winch Mount It Works Great.
HARTLEY is offline  
Sponsored Links
Advertisement
 
post #4 of 45 (permalink) Old 12-03-2008, 06:32 PM Thread Starter
 
Join Date: Jun 2008
Posts: 8
what do you mean quick connect how did u do this because i bent my moun too thanks
048teryxx048 is offline  
post #5 of 45 (permalink) Old 12-03-2008, 06:46 PM
 
Join Date: Nov 2008
Posts: 17
Quick Disconnect Plow Mount

The Eagle Plow Mount Has Six Studs The Rears Are A U Bolt Type They Are Easy To Get On And Off But The Front 2 Come Down From The Winch Mount And Are Not Easy To Get On And Off Quickly. All I Did Was Removed The Plow Mount And Put A Longer Bolts Through The Winch Mount With A Nut On It To Keep The Winch Mount Tight And Now I Just Take A Deepwell Socket To Remove The 2 Front Nuts For The Plow Mount It Still Take A Couple Of Minutes To Take Off A Little Longer To Install But Much Better Than Before I'am Trying To Make It Faster Yet Will Let You Know But Can Send Pics If Needed Hope It Heps
HARTLEY is offline  
post #6 of 45 (permalink) Old 12-03-2008, 06:49 PM Thread Starter
 
Join Date: Jun 2008
Posts: 8
ok thanks
048teryxx048 is offline  
post #7 of 45 (permalink) Old 12-04-2008, 03:19 AM
 
ckbetz's Avatar
 
Join Date: Nov 2008
Location: SE Ohio
Posts: 209
Moose Utilities also makes snow plows, not sure how they mount though.
ckbetz is offline  
post #8 of 45 (permalink) Old 12-06-2008, 07:39 AM
 
Join Date: Nov 2008
Location: Thunder Bay,ON
Posts: 22
Black Line Plow

Check out theblack line plow -uses a 2" reciever style mount very quickto connect and disconnect.
Tcat1019 is offline  
post #9 of 45 (permalink) Old 12-23-2008, 10:43 AM
 
Bigster's Avatar
 
Join Date: Dec 2008
Posts: 8
These are a couple of pictures of my Teryx that i have made a custom bed cover to support my custom stainless steel retractable light bar to provide lighting when plowing since the headlights blind you with glare off the blade. If you are interested let me know because I have more pictures.






Last edited by Bigster; 12-23-2008 at 11:10 AM.
Bigster is offline  
post #10 of 45 (permalink) Old 12-23-2008, 06:45 PM
 
Join Date: May 2008
Location: Winslow, Maine
Posts: 114
I see your mount tabs are starting to bend. Keep an eye on them. Mine have dropped over an inch. American Manufacturing (eagle and tusk) has redesigned it and sending me a test unit. Check with Hunterworks or teryxhq for more details!
grizzjeeper is offline  
post #11 of 45 (permalink) Old 12-23-2008, 06:50 PM
 
Bigster's Avatar
 
Join Date: Dec 2008
Posts: 8
Thank you for the information. I am definatly gonna check with them and see if they will send me one out also. let me know how yours works out and maybe some pictures if you could. Thanks
Bigster is offline  
post #12 of 45 (permalink) Old 01-10-2009, 03:10 PM
 
Join Date: Dec 2008
Location: East Selkirk MB
Posts: 2
i have the American Eagle plow system and it works great...i have had to reinforce the mounting bracket..i caught a piece of hard packed snow on the very end of the plow and it twisted..i like the fact i can push snow really high..i would like to know how to put a quick disconnect so it could come off a lot faster than undoing the 2 big bolts all the time..so far no complaints but the bracket..to be expected with that much weight pushing against it.. its already built a sno x course for the kids
sledhead73 is offline  
post #13 of 45 (permalink) Old 11-12-2014, 04:09 PM
Russ T.
 
Join Date: May 2014
Location: west virginia
Posts: 109
wanting a plow for my 2014 t4. I see a lot of members like Denali. I have a Moose on my UTV and its been great for many years. Denali has a good price for the complete system with hydraulic turn. My questions....1. are they good plows. 2. Are the mounts strong enough and EASY to hook up. 3. I'd love to just get the 66" plow....will I regret that? There is only 6" difference. 72" = 5" on each side. 66" 2.5" on each side. Should I go with 72"? 4. I only have a 3000 lb Warn winch (my mistake). Is it enough to handle the plow? 5. Any other plow recommendation is appreciated.
Thanks......Russ T
rjtaler1717 is offline  
post #14 of 45 (permalink) Old 11-13-2014, 04:54 PM
Official Site Vendor
 
Join Date: Feb 2009
Posts: 240
Thanks for considering our DENALIS. We shipped about 400 plows in the last ten days or so and guys are loving them. We do have the 2" receiver option as well. Thanks!

Peter Kapsner
President / Motoalliance

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
src="signaturepics/sigpic2143_1.gif" alt="" border="0" />

Interested in Motoalliance products? Head to our vendor section to learn more about our VIPER winches DENALI plows, FIRESTORM heaters, IMPACT Implements, and SIRIUS PRO lights?
You will find our FORUM SALES there too!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
motoalliance is offline  
post #15 of 45 (permalink) Old 12-28-2014, 08:41 PM
 
Join Date: Mar 2013
Location: boise, id
Posts: 9
I bought the 72" Eagle Plow kit with Hyd. Turn. for my t4. The Plow is great but the Hydo unit quits when temp dips in the teens, just FYI for those thinking of buying the $650 upcharge for unit. I write this later after talking the the KYB manufacture as well as Eagle people and the results was less bad. They pretty much said that "never heard of such thing" and Q & A over troublshooting mainly the power supply confirms 12.3V at cold temps so battery/charging system is not the red flag as they pointed out. Also to note I took the power pack to a Hydro Shop to check and C/O fliud thinking sub Zero Temps are a problem, this all came back good for bench testing. Eagle Plow replyed me and stated my unit was out of Warrenty, which I new but the dates they gave me were making it out of warrenty before I even bought the unit....Whatever I thought they could have least offered to take a look at it to see about a repair, never assumed I get a free job....useless people..
Anyway I have to take a weed burner to it once its outside in cold temps more than 15min to make it work then park it inside garage for a bit. The people at MotoAlliance were great to work with and helped me as much as they could. I now have a great summer time plow and installed the manual lever. Just sharing my experince with plow kit to anyone who reads it.
Thanks.
bonner is offline  
post #16 of 45 (permalink) Old 12-28-2014, 08:52 PM
Russ T.
 
Join Date: May 2014
Location: west virginia
Posts: 109
Thanks for the info. It doesn't make me feel real well. Mine is mounted and paid for. All I can do is hope nothing like that happens and if it does, it does soon. I think I'll reach out to them about this problem just to put them on notice. I'm sorry for you though......Thanks.....Russ T
rjtaler1717 is offline  
post #17 of 45 (permalink) Old 12-29-2014, 05:17 AM
 
hunter541's Avatar
 
Join Date: Oct 2009
Location: pennsylvannia
Posts: 1,163
i have a warn provantage front mount easy on and off and the mount is high enough that it wont get hit off roading
hunter541 is offline  
post #18 of 45 (permalink) Old 12-30-2014, 08:07 AM
Moderator
 
mrwvsportsman's Avatar
 
Join Date: Feb 2012
Location: WV
Posts: 1,602
Quote:
Originally Posted by hunter541 View Post
i have a warn provantage front mount easy on and off and the mount is high enough that it wont get hit off roading
How do you hook your cable? That cheap strap they send for you to use keeps loosening up. I'd like to rig something up on the front that sticks out a little farther from the bumper to hook to. The angle of the cable isn't very good on mine.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Ridin' for the Big Guy!
mrwvsportsman is offline  
post #19 of 45 (permalink) Old 12-30-2014, 08:25 AM
 
hunter541's Avatar
 
Join Date: Oct 2009
Location: pennsylvannia
Posts: 1,163
i have the warn bumper on mine my strap is the original one i got in 09 i always tie in itself and don't have problems but the newer ones i think are designed different.i don't use it but my bumper was deigned with a square u bracket to hook the cable to i just use the strap on the top bumper light bar
hunter541 is offline  
post #20 of 45 (permalink) Old 01-03-2015, 05:43 AM
 
MiramichiTeryx's Avatar
 
Join Date: Apr 2014
Location: New Brunswick, Canada
Posts: 107
I just installed a brand new 72" kimpex quick connect plow a couple weeks ago.so far I have plowed a couple storms with it here in New Brunswick and I'm very impressed with the quality of the plow and how much snow I am able to move with the Rex. The mounting bracket on the bottom of the bike does hang down quite a bit but it's just seven bolts to remove it again in the spring so I'm not worried about hitting anything and bending it. The quick connect is nice and literally takes a couple seconds to attatch and release the blade from the bike.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	1686
Size:	1.66 MB
ID:	21162  

[U]2014 800 Teryx LE[U]
30" Roctanes
14" HD3 wheels
2" Highlifter lift kit
3500 warn winch
Jensen marine stereo
Uni air filter
HMF swamp series XL slip-on
MiramichiTeryx is offline  
post #21 of 45 (permalink) Old 01-04-2015, 06:10 AM
 
Join Date: Jul 2014
Location: Ontario
Posts: 80
I got a kfi pro-s series 72 inch plow for my 14 T2 works very well and the front plow mount is high and strong. The push tubes are the stongest i have seen yet and the plow is well built. Also comes with a nice plow flap as well. There was a few that were all around the same price and i am glad i chose this one based on the build quality. Have about 4 hrs on it so far this winter. Just my 2 cents
RexBlue14 is offline  
post #22 of 45 (permalink) Old 01-04-2015, 11:04 AM
SidexSide Junkie
 
wvyankee2's Avatar
 
Join Date: Jul 2008
Location: Cabell Co., WV
Posts: 365
Denali Pro 66" from Motoalliance.


2014 T2 LE

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
wvyankee2 is offline  
post #23 of 45 (permalink) Old 01-04-2015, 02:03 PM
 
Join Date: Nov 2014
Location: Eastern Idaho
Posts: 20
I installed a 72" Cycle country plow using their front mount kit and push tube to a 3500# Superwinch in November. I mounted the winch control to the shift lever , so far it's worked out very well. I had used a Cycle country plow previously on a Ranger with their "mid mount" kit and the ground clearance wasn't very good with the plow off so I modified the bracket which helped some but this front mount on the Terex has a lot better clearance. Incidentally the Super ATV EZ Steer kit works awsome.
davepan is offline  
post #24 of 45 (permalink) Old 01-04-2015, 02:09 PM
Russ T.
 
Join Date: May 2014
Location: west virginia
Posts: 109
I went with the 72" Eagle with hydraulic turn. Seems well built and easy to use but haven't had any snow in Wva yet. What did you mount on the shifter and how did you do it? Also......what is the EZ Steer?
Thanks.......Russ
p.s. Pics??
rjtaler1717 is offline  
post #25 of 45 (permalink) Old 01-04-2015, 02:24 PM
 
Join Date: Nov 2014
Location: Eastern Idaho
Posts: 20
I mounted the winch control rocker switch to the shift lever so it can operated without removing your hand from the shift lever while plowing. The EZ steer is electric power steering that can be added to the T2 and T4 Terex. You can buy a modified shift lever with the winch control switch in it for the RZR but I havnt seen one for a Terex so I just improvised and mounted my own.
davepan is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome