Teryx Snorkels / Pics and Parts List

most run factory air box and snorkel off that mine would be good as the air cleaner is right in the open and easy to get at and clean

Attached Images

	IMG_0744.JPG (49.2 KB, 29 views)
	IMG_0745.JPG (49.3 KB, 31 views)
	IMG_0748.JPG (70.1 KB, 35 views)

Thanks for the info. Installed my snorkels last night. Your parts list and step-by-step took all the guess work out it. Plan on trying it out this weekend in PA.

hey guys. long time reader, first time poster. i dont know how you guys got the 3'' x 2'' rubber adapter to fit reverse in the housing without the 2'' side hitting the actual belt. and if i flipped it so the 3'' went on the outside, the adapter wasnt big enough. so i got a a 4'' x 3'' rubber adapter and put the 4'' around the exhaust port and put a 3'' to 2'' coupling inside the adapter. since the adapter sat so high i couldnt run my pvc straight up, so i ran a sharp down and back (port was pointed to rear, so took pvc and made U -turn back to front) and then ran it up by the side of the airbox like everyone else does. it looks complicated but really easily. didnt have to struggle with that 3'' x 2'' adapter. so far works great. hope to get some pics up to show you what i mean.

Im due an oil change so ill get some pics of what i
did with the plastic off...till then
Ozark natl forest....no snorkles



Now snorkled and all vents ran to the top of snorkles

i used a 4"to2" on my belt exhaust

__________________
SUNBEAM RED LE TERYX

msa nukes,belt snorkels,dyna cdi,billet shift knob,extreme lift,HW carb kit,rear bumper,k&n filter kit,Night owl hids,overdrive plate,grant steering wheel,yellow top optima,30"XXL's

What i used also...easy fit

yeah lowe's didnt have a 4 to 2. i had to get a 4 to 3 and put a pvc coupler that changed the diameter from 3 to 2. worked good but had to run pipe back towards the rear and then do a u turn back towards front and ran it up side of airbox like most people. looks like a hassel but really wasnt that hard. had more of a hard time on the intake belt than anything. that was a pain.

note for everyone. when you put the 4 to 2 adapter on the exhaust side and cant clear the brace bar above (everyone knows what im talkin about). if you do what i did and make a u turn to the right with your piping and then run up the side of the airbox like normal....


make sure after you set your piping and BEFORE glue it together, make sure you can shift your teryx into Reverse. the piping is right next to the linkage on the transmission. i found out the hard way. i got my piping all set, everything looked good. so i marked it, painted it, set them and glued them. finished my whole project and was happy to try it out. well i couldnt get it to go into reverse and get out of the garage. the linkage would slide backwards into the pvc and prevent me from getting into reverse. so now i have to take it all apart and start new. ugh.

Thanks GPSTECH for the pics and parts list. I used your design for the front ( already had the rear done). The only thing I added was I wraped the pvc with heat wrap. Hopefully it won't melt. Thanks again.

Does anyone have pics or good explanation of what and where vents are besides the belts and airbox that need extended? I have an 09 le if it makes a difference.