OK, Seats and harnesses will be near the top of the list for the upcoming Teryx purchase. Looked at PRP high backs but the seat back sounds low and it looks like the 31" tall is measured from the bottom of the seat mounting location, not the bottom of the seat cushion. at 31" that is just a bit too low for me, as I have a long torso, short legs and am 6'1" tall. There is no mention on how high the adjustable headrests go. ideal to me would be 36"tall or fairly close to that.

Anyone have some ideas or measurements of seat cushion to top of headrest?

At PRP, our standard Teryx seat is 28" from the cushion to the top of the adjustable headrest. We also have seat called the Teryx EZN that feels a little wider because the sides are lower. It is also taller @ 30" from the cushion to the top of the adj headrest. Since we make everything in-house, we can make any seat taller (typically either 2" or 4") for a $35.00 upcharge per seat. (It's going to have to be adjusted forward a little with a stock cage if it's that tall). Our turnaround time is less than 2 - 2-1/2 weeks on anything custom. For any custom orders, give us a call @ 800-317-6253 or call one of our many vendors. Thanks, Team PRP

Sweet! I'll have to look into that for sure. Appreciate the feedback!

No prob. Let us know!

I am 6' 1" and I have PRP seats in my RZR (PRP RZR Seats) and I fit fine. Head rest has quite a bit of adjustment.

__________________
www.UTVGuide.net

Go with PRP all the way. I am using their Low backs with head rests and they are very comfy. PRP also stepped up and donated a set of seats to a friend of mine that we are doing a Teryx build up on.(see post at the top of the general forums). SO PLEASE give them your business

__________________
2008 Teryx
So Cal Fab +5 Arms w/ Sway-A-Ways, Summers Brothers Axles, So Cal Fab 4 place Cage with roof, Beadlock Spec. Spyders with 9" BigHorns, PRP Low Backs w/ Crow Belts, Optimum Battery, Lawrence 540c Baja GPS, CDI by VDI, Radiator Shrouds, Billet Tip on Pipe, Wink Mirror, Billet Grab handels, 4 H.I.Ds across the top on So Cal Fab folding Light Bar, Trail Tech Vapor Digi Dash, Front & Rear Bumpers, SafeGlow LED whip, Momo Trek Wheel, 3/4 doors.

Can I order low backs with tweed? All I hae ever seen were low backs with leather.....and that gets too hot!

Per the PRP web site you can get them in anything you want.. Check it out here: Premier Racing Products - Fabric
Side X Side Seats

__________________
2008 Teryx
So Cal Fab +5 Arms w/ Sway-A-Ways, Summers Brothers Axles, So Cal Fab 4 place Cage with roof, Beadlock Spec. Spyders with 9" BigHorns, PRP Low Backs w/ Crow Belts, Optimum Battery, Lawrence 540c Baja GPS, CDI by VDI, Radiator Shrouds, Billet Tip on Pipe, Wink Mirror, Billet Grab handels, 4 H.I.Ds across the top on So Cal Fab folding Light Bar, Trail Tech Vapor Digi Dash, Front & Rear Bumpers, SafeGlow LED whip, Momo Trek Wheel, 3/4 doors.

Crowdog, can you measure the seats from the bottom of the seat cushion to the top of the headrest at its upper most adjustment?

WE HAVE A SEAT THAT IS 30" FROM THE TOP OF THE CUSHION TO THE TOP OF THE HEADREST, AND IF YOU WANT TO PAY FOR THE EXTRA TALL OPTION ($33.00), WE WILL MAKE YOUR SEAT AS TALL AS YOU WANT.

YOU CAN PICK UP OUR SEATS THROUGH

SDHQ
525 EAST BASELINE ROAD STE 108
GILBERT, AZ 85233
877-969-2929
OR
HOT RIDE 4 U
14045 DESERT ROSE CT.
BAKERSFIELD, CA 93314
661-587-7702

Attached Images

	AGGRESSORCUSTOM WITH ADJ.HEADREST.jpg (12.2 KB, 13 views)
	Aggressor.jpg (74.4 KB, 11 views)