Kawasaki Teryx Forum Header Left   Kawasaki Teryx Forum Header Right

Teryx 4 Lift Kits

This is a discussion on Teryx 4 Lift Kits within the Teryx4 forums, part of the Kawsaki Teryx Forum General Teryx category; I am looking into buying a Catvos 3" lift kit. Is anyone currently running a lift kit on their Teryx4 that can give me some ...


Go Back   Kawasaki Teryx Forum > General Teryx > Teryx4

Teryx4 Dedicated discussions for the Kawasaki Teryx4 (Teryx4 Forum)

Like Tree24Likes
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-10-2013, 06:43 PM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
Teryx 4 Lift Kits

I am looking into buying a Catvos 3" lift kit. Is anyone currently running a lift kit on their Teryx4 that can give me some input? Should I go with the 3" Catvos, 2" highlifter, or is there anymore 2-3" lift out on the marker that are durable?
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
Sponsored Links
TeryxForums.net is the premier Kawasaki Teryx Forum on the internet. Registered Users do not see these ads. Please Register - It's Free!
   
  #2 (permalink)  
Old 03-10-2013, 07:18 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
For the money..I find the highlifter hard to beat!!
Reply With Quote
  #3 (permalink)  
Old 03-10-2013, 07:58 PM
kymedic's Avatar  
Join Date: Jan 2013
Location: Kentucky
Posts: 373
I have the 2" HL and so far it seems rock solid.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Reply With Quote
  #4 (permalink)  
Old 03-10-2013, 08:04 PM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
How much more of an angle are the axles? So does the highlifter lift pull your tires in any? Im running 29.5x12x12 outlaws and they rub just a little bit on the floor only when I turn at the maximum radius.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
  #5 (permalink)  
Old 03-10-2013, 08:09 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
It pulls them in a bit but not much. I put spacers on mine to make up the difference but a lot of guys just leave em. I run 28x12x12 with no issues. Doesn't seem to add a whole lot of angle on the axles but some. They try to tell you to notch the frame for the boots but my friends and I left ours alone with no problems at all! As do most guys on here. Try (powersport junkie) for the best price!

Last edited by BTNROXINMOAB; 03-10-2013 at 08:14 PM.
Reply With Quote
  #6 (permalink)  
Old 03-10-2013, 08:13 PM
kymedic's Avatar  
Join Date: Jan 2013
Location: Kentucky
Posts: 373
I don't have any spacers and i am running 29.5x10x14 terminators.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Attached Thumbnails
Teryx 4 Lift Kits-uploadfromtaptalk1362967996325.jpg  
Reply With Quote
  #7 (permalink)  
Old 03-10-2013, 08:17 PM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
I have 2" spacers all the way around right now but im still running the 12" factory rims. The offset on the rim may be why I am rubbing. I think I might look into getting the highlifter lift. I really liked the arched arms on the Catvos though. Have you guys seen any T4s in the mud with the catvos lift on them.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
  #8 (permalink)  
Old 03-10-2013, 08:20 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
I personally haven't seen one but I do like the arched A-arms. May install one down the road but the highlifter was so cheap and EASY to install made it easy to choose!
Reply With Quote
  #9 (permalink)  
Old 03-10-2013, 08:26 PM
kymedic's Avatar  
Join Date: Jan 2013
Location: Kentucky
Posts: 373
Mine rubs also on full left turn. Even with the lift. It rubs a nub that sticks out. Have seen others heat that nub up and push it in.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Reply With Quote
  #10 (permalink)  
Old 03-10-2013, 08:36 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
I heated mine up and cut it right off. Then heated up some plastic, molded it in place and riveted it on. Turned out sweet! I've seen it catch that nub and rip a big ass hole in the firewall. Tomanytoys can tell ya bout that. Save yourselves a big headache and just get it gone!
Reply With Quote
  #11 (permalink)  
Old 03-10-2013, 08:39 PM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
Looks like ill need to do some fabricating before I give it hell then. Thanks for the input.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
  #12 (permalink)  
Old 03-10-2013, 09:56 PM
tomanytoysnotnuftime's Avatar  
Join Date: Mar 2010
Location: Fort Saskatchewan, Alberta, Canada
Posts: 1,997
True dat about the nub! I have HL 2" lift and just put on 29.5 x 11 x 14 outlaw 2's with 1" spacers cause I think the tires would be ripping and tearing the floorboard without them.
SD90, eltorobowen and brandeaux like this.
__________________
2012 VIBRANT blue Teryx 4, Muzzy's, ECU reflash, custom cage & roof & windshield, machined clutch, 14" STI HD Beadlocks with 32" Roctanes/Tatou 4S Tracks, Warn XT40 winches front & rear, bedlift 2" Highlifter kit, snorkeled to 6ft, Rigid Duallys

2010 black, FST 840 stage II cams, DASA intake & injectors, BF throttle bodies, Msd, Muzzy Pro`s, Snorkeled, Warn XT40, 14" STI HD Beadlocks with 30x10x14 EFX Motoclaws, Custom rear Radiator, Unisteer
Reply With Quote
  #13 (permalink)  
Old 03-11-2013, 06:33 PM
Gunner7176's Avatar
Premium Member
 
Join Date: Jan 2013
Location: Baxley, GA
Posts: 69
Anybody keep the stock tires and wheels with the 2" Highlifter kit? I just ordered the kit and planned on keeping the stock tires and wheels till I wear em' out.
Reply With Quote
  #14 (permalink)  
Old 03-11-2013, 06:40 PM
tomanytoysnotnuftime's Avatar  
Join Date: Mar 2010
Location: Fort Saskatchewan, Alberta, Canada
Posts: 1,997
Stock wheels and a lift kit is like stilettos and sweatpants, doesn't really make sense or look right.
BTNROXINMOAB likes this.
__________________
2012 VIBRANT blue Teryx 4, Muzzy's, ECU reflash, custom cage & roof & windshield, machined clutch, 14" STI HD Beadlocks with 32" Roctanes/Tatou 4S Tracks, Warn XT40 winches front & rear, bedlift 2" Highlifter kit, snorkeled to 6ft, Rigid Duallys

2010 black, FST 840 stage II cams, DASA intake & injectors, BF throttle bodies, Msd, Muzzy Pro`s, Snorkeled, Warn XT40, 14" STI HD Beadlocks with 30x10x14 EFX Motoclaws, Custom rear Radiator, Unisteer
Reply With Quote
  #15 (permalink)  
Old 03-11-2013, 08:04 PM
slick86's Avatar  
Join Date: Feb 2013
Location: bethlehem , ga
Posts: 125
i have a 3" gorrilla and love it
__________________
leaving behind one polaris at a time
Reply With Quote
  #16 (permalink)  
Old 03-11-2013, 09:05 PM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
What all comes with the gorrilla lift?

Slick-- the 3" gorilla lift you are referring to is it the stage one gorilla lift. Did it actually give you 3" of lift? The website shows that it will give you 1.5" to 3" of lift.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.

Last edited by Relic1261; 03-11-2013 at 09:16 PM. Reason: Automerged Doublepost
Reply With Quote
  #17 (permalink)  
Old 03-11-2013, 10:46 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
Quote:
Originally Posted by Gunner7176 View Post
Anybody keep the stock tires and wheels with the 2" Highlifter kit? I just ordered the kit and planned on keeping the stock tires and wheels till I wear em' out.
Won't hurt anything at all but as tomanytoys said..it do look awkward!!
Reply With Quote
  #18 (permalink)  
Old 03-11-2013, 11:01 PM
Gunner7176's Avatar
Premium Member
 
Join Date: Jan 2013
Location: Baxley, GA
Posts: 69
Laughing

Quote:
Originally Posted by BTNROXINMOAB View Post
Won't hurt anything at all but as tomanytoys said..it do look awkward!!
lol, OK, I ordered 28" ITP Mega Mayhem's but keeping the camo wheels.
Reply With Quote
  #19 (permalink)  
Old 03-11-2013, 11:43 PM
BTNROXINMOAB's Avatar
Premium Member
 
Join Date: Sep 2012
Location: roy,utah
Posts: 1,109
Quote:
Originally Posted by Gunner7176 View Post
lol, OK, I ordered 28" ITP Mega Mayhem's but keeping the camo wheels.
Nicely done..post up pics!!
Reply With Quote
  #20 (permalink)  
Old 03-12-2013, 07:03 AM
slick86's Avatar  
Join Date: Feb 2013
Location: bethlehem , ga
Posts: 125
Quote:
Originally Posted by Relic1261 View Post
What all comes with the gorrilla lift?

Slick-- the 3" gorilla lift you are referring to is it the stage one gorilla lift. Did it actually give you 3" of lift? The website shows that it will give you 1.5" to 3" of lift.
yes it is the stage one and it actually gave it 3" , i was worried about the 1.5" to 3" as well when i was reading about it on there site so i called them and they said they have that on there site because it is different on several models but the t4 was 3" when i measused the before and after it was 3 in the front and 2 3/4 in the back , the brackets that come with it mount on top of the shocks the only thing you have to do is drill a hole in the back where it mounts to the frame , it took about 30 mins to install very easy , hope this is some help
Attached Images
  
__________________
leaving behind one polaris at a time
Reply With Quote
  #21 (permalink)  
Old 03-12-2013, 08:34 AM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
I purchased the 3" Gorilla Stage One Last night. Looking forward to putting it on. Will post pictures.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
  #22 (permalink)  
Old 03-12-2013, 08:44 AM
reevesr's Avatar  
Join Date: Feb 2013
Location: Arkansas
Posts: 74
Quote:
Originally Posted by Relic1261 View Post
I purchased the 3" Gorilla Stage One Last night. Looking forward to putting it on. Will post pictures.
Who did you purchase from?
Reply With Quote
  #23 (permalink)  
Old 03-12-2013, 08:58 AM
Relic1261's Avatar
Riggs
 
Join Date: May 2012
Location: Alvin, TX
Posts: 36
I purchased the 3" Gorilla Stage One Lift from gorillaaxles.com. I got it for $165.00.
__________________
2012 Red Teryx4: 29.5x12X12 Outlaws with 2" spacers.
Reply With Quote
  #24 (permalink)  
Old 03-12-2013, 10:37 AM
KawiRick's Avatar  
Join Date: Jan 2013
Location: Tampa, FL
Posts: 56
I went with the Catvos and 30" backs. Little over priced and I'm not a fan of the rear coil spacers but ride quality still seems great and boy do I have some ground clearance now with the arched a-arms. If I could go back I would prob just do a bracket lift but I'll settle with what i got
Attached Thumbnails
Teryx 4 Lift Kits-cam00105.jpg   Teryx 4 Lift Kits-cam00106.jpg   Teryx 4 Lift Kits-cam00120.jpg  
Reply With Quote
  #25 (permalink)  
Old 03-12-2013, 03:35 PM
Plugger31's Avatar  
Join Date: Aug 2011
Location: Alvin, Tx
Posts: 148
Kawirick did you have to put spacers?
__________________

2013 T4 white, Catvos lift, msa Kore wheels and 29.5 outlaw2's, utv inc top, wetsounds speakers, Fosgate Amp, off-road Sounds wake tower bar
2010 Teryx Sport
Reply With Quote
Reply

Lower Navigation
Go Back   Kawasaki Teryx Forum > General Teryx > Teryx4


Search tags for this page
2014 teryx4 lift kit problems
,
kawasaki teryx 4 lift kit
,
kawasaki teryx lift kit
,
lift kit for kawasaki teryx 4
,
lift kit for teryx 4
,
teryx 4 lift
,

teryx 4 lift kit

,
teryx 4 lifted
,
teryx lift kit
,
teryx4 lift
,

teryx4 lift kit

,
teryx4 lift kit issues?
Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 10:19 PM.