Xtreme Machine and Fabrication

This project has served it's purpose ready for a new build low low hours used mostly for the Side by Side Battle of the Builders and for Display

$23,999. OBO


Kawasaki Teryx 2008 LE Complete Build Specs

Suspension:
XMF +5 Long Travel Suspension Kit With Walker Evans Shocks
Specifications:
Arms are 5” wider than stock per side
Wheelbase - + 0” forward + 1 1/4” back
Camber adjustable - up to 2 degrees in the front arms
Wheel travel 15.5”Rear and 16" + Front
Shocks - Walker Evan remote reservoir 16 way adjustable
Hyperco Springs
Billet aluminum reservoir mounts
Axles - XMF 4340 Heat Treated center less ground and powder coated
Recommended tire size is 25” with Aftermarket 12” wheel with 5-2 offset
Arm Construction – 4130 Chromolly 1 ¼” X .120 wall thickness
TIG welded for strength and appearance
All arms use grease-able Delron bushings and crush tubes on the chassis side
New Front Brake Line assembly
Powder coated finish
Lifetime warranty against manufacture defects.
Xtreme Machine and Fabrication Components :
XMF 2 seat Play Cage with Aluminum Top
Optional Windshield
XMF Front and Rear Bumpers
XMF Bolt on cooler/fuel rack
XMF Light Bar
XMF Convex Billet Rear View Mirror
XMF Convex Billet 4" Side View Mirrors
XMF Lowering seat bases
XMF Billet Dress up Kit
Shift Knob - Differential Button- Shift Gate Bezel - Glove Box Handle-
Ignition Bezel- Light Switch Knob-Hardware Dress up kit
XMF Bolt on Door Bars
XMF Bolt on Grab handle
XMF Billet Dome Light
XMF Billet Head Set Hanger
Motor specs: 65+HP
Weller 840 Kit
Muzzy Dual Exhaust
CDI Box
AFE Intake
Custom Ported Heads
10-1 compression Runs on 91 octane
Weller Racing Custom Cams
Seats:
BS Sand Seats with Billet Seat belt Inserts
Crow Seat Belts
Paint:
Deano's Custom Paint
Tires and Wheels:
OMF Polished Bead locks
ITP Wheels with Big Horn Tires
Front and rear skid plates

That is one bad @ss machine, the paint alone is stunning!

__________________
All AMSOIL Fluids, LSR +5 XTR Suspension (Elka Elites), Rigid RAD4 Cage; Dually & 10" Amber, BS Sand Seats, Rigid HID, Lots of UTV Inc,, Dynatec CDI, Hunterworks Carb Kit, DJ Safety Belts, Fuel Gauge, Quick Light 6" Fiber Whip (red), Rugged Intercom, Monster Edition Rims, Maxxis Cerros, Lowrance HDS-5, DFR Steering Rack & Yoshimura Exhaust, Heads ported/polish by Action Powersports in Chandler,AZ
az_amsoil@cox.net

Yea..what Bob said. Good luck with the sale

__________________
You

I drove this Teryx at the Side x Side Battle of the Builders. Top notch UTV for sure. Very nice work Scott!

__________________
www.UTVGuide.net