Teryx speed limiter removal - Page 7 - Kawasaki Teryx Forum
 39Likes
Reply
 
LinkBack Thread Tools Display Modes
post #151 of 173 (permalink) Old 03-30-2014, 12:50 PM
 
chilly2031's Avatar
 
Join Date: May 2013
Location: Maryland
Posts: 3,072
I put dielectric grease on every connection on my t4.

Sent from my SCH-I545 using Tapatalk

Only thing I forgot to tell you Mike is I put a piece of foam on top of the pcv before I closed the pelican case to keep it from rattling around.

Sent from my SCH-I545 using Tapatalk

Last edited by chilly2031; 03-30-2014 at 12:52 PM. Reason: Automerged Doublepost
chilly2031 is offline  
Sponsored Links
Advertisement
 
post #152 of 173 (permalink) Old 03-30-2014, 02:45 PM
 
T4maniac's Avatar
 
Join Date: Jan 2014
Location: WV
Posts: 719
Where are you getting the pelicn boxes. Are they the boxes you can buy for boats to keep phones and such dry. What size are you using.


Sent from my iPhone using Tapatalk

2014 Teryx T4, Lime green, EMP front and rear bumpers, EMP front hitch receiver, Power commander 5, Muzzy exhaust, VFJ Stage 3 clutch, Dynamat sound proofing, Terra 45 superwinch, Kolpin snow plow and mount, ITP 112 14" wheels, 32x10x14 mammoth mayhems, Super ATV 6" lift kit, Custom Cage with custom aluminum roof, Axia alloy rear view mirror
T4maniac is offline  
post #153 of 173 (permalink) Old 03-30-2014, 02:53 PM
Premium Member
 
MIKE_D's Avatar
 
Join Date: Aug 2013
Location: Russell Springs KY
Posts: 420
Quote:
Originally Posted by T4maniac View Post
Where are you getting the pelicn boxes. Are they the boxes you can buy for boats to keep phones and such dry. What size are you using.


Sent from my iPhone using Tapatalk
Model 1010. From amazon.com
MIKE_D is offline  
Sponsored Links
Advertisement
 
post #154 of 173 (permalink) Old 03-30-2014, 03:31 PM
 
T4maniac's Avatar
 
Join Date: Jan 2014
Location: WV
Posts: 719
Thanks!

2014 Teryx T4, Lime green, EMP front and rear bumpers, EMP front hitch receiver, Power commander 5, Muzzy exhaust, VFJ Stage 3 clutch, Dynamat sound proofing, Terra 45 superwinch, Kolpin snow plow and mount, ITP 112 14" wheels, 32x10x14 mammoth mayhems, Super ATV 6" lift kit, Custom Cage with custom aluminum roof, Axia alloy rear view mirror
T4maniac is offline  
post #155 of 173 (permalink) Old 03-30-2014, 07:36 PM
2012 T4 CAMO EPS
 
MICKEYTKD's Avatar
 
Join Date: Nov 2012
Location: Communist New York
Posts: 775
Pelican 1010 from Ebay
MICKEYTKD is offline  
post #156 of 173 (permalink) Old 04-11-2014, 05:18 PM
 
Techgeek201's Avatar
 
Join Date: Apr 2013
Location: NNJ/NEPA
Posts: 115
Are these all the same from any vendor or are yours different?

12' Teryx4 EPS, PCV on the way!

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Techgeek201 is offline  
post #157 of 173 (permalink) Old 04-11-2014, 05:29 PM
 
Techgeek201's Avatar
 
Join Date: Apr 2013
Location: NNJ/NEPA
Posts: 115
Oh! your not that far from me. I may have to pay you a visit for some tuning!

12' Teryx4 EPS, PCV on the way!

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Techgeek201 is offline  
post #158 of 173 (permalink) Old 05-17-2014, 05:06 PM
 
Join Date: Apr 2014
Location: Phoenix
Posts: 223
Let me understand -- An MSD Charge FI that came off a 2010 T2 won't work on my 2013 T4 ?
AZRickD is offline  
post #159 of 173 (permalink) Old 05-17-2014, 05:41 PM
Premium Member
 
Freeezen's Avatar
 
Join Date: Apr 2009
Location: Anaheim, CA
Posts: 3,607
Quote:
Originally Posted by AZRickD View Post
Let me understand -- An MSD Charge FI that came off a 2010 T2 won't work on my 2013 T4 ?
That is correct.

2009 Kawasaki Teryx Sport Benchmark SBK, CNC ported heads, +1mm valves, VFJ clutch kit 60 grams, #1 red spring, LTI +5" suspension, FU2Chassis cage, Induced Fab doors, 27x9 Mongrels, DASA exhaust w/quiet cores, DASA impeller, OD clutch plate, KEBC plate, MSD, bored throttle bodies, FuelUTV Siphon break, UNI air filter, lime green secondary spring, Agressor seats, TripleX bench, 4" cube LED headlights, 6.5" LEDs on the A pillar, Fiber Skinz diff skids, UTV Inc. Temp gauge, UTV Inc. fan bypass, SSV stereo.
Safety is no accident

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Freeezen is offline  
post #160 of 173 (permalink) Old 05-20-2014, 12:46 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
just a heads up, all pcv tuners are back in stock at this time.

I have 45 left for the 2014 800's
I have 20 left for the 12-13 teryx 4

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #161 of 173 (permalink) Old 06-23-2014, 10:34 AM
 
black90lx2's Avatar
 
Join Date: Jun 2014
Location: Scottsburg, Indiana
Posts: 2
Alright I am new to the Teryx4 game, I own a 2012 Teryx4, Do I understand correctly that the Brute Force ECU's wont or will work on the Teryx4?
black90lx2 is offline  
post #162 of 173 (permalink) Old 06-24-2014, 07:25 AM
leemetalfab
 
Kenneth19777's Avatar
 
Join Date: May 2014
Location: Alvarado,Texas
Posts: 35
Have you tried the locker bypass that is done on the Rubicon ? I will look at mine when I get back to Texas and see if it looks the same but they put the limiter there for a reason I know Yall know that .I know that it would be helpful to have a little more range than we have now on them.
Kenneth19777 is offline  
post #163 of 173 (permalink) Old 05-05-2015, 11:57 AM
 
Join Date: Aug 2012
Location: Mexico
Posts: 2
I have a Teryx 2010 with PCV/Autotune kit, dual sO2, with DMC twin full exhaust system.

I have the terrible speed limiter.
What I can do to remove the speed limiter?

Thanks
PISTON is offline  
post #164 of 173 (permalink) Old 05-05-2015, 11:59 AM
 
Join Date: Aug 2012
Location: Mexico
Posts: 2
speed limiter with PCV

I have a Teryx 2010 with PCV/Autotune kit, dual sO2, with DMC twin full exhaust system.

I have the terrible speed limiter.
What I can do to remove the speed limiter?

Thanks
PISTON is offline  
post #165 of 173 (permalink) Old 05-06-2015, 08:04 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
For bypassing the limiters, fuel, timing and speed limiter removal, I use the MSD. these only fit the 09-12 teryx 2 seaters.

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #166 of 173 (permalink) Old 05-16-2015, 11:12 AM
 
Join Date: Nov 2014
Location: Medicine Hat AB.
Posts: 9
Mr. Vforce, do you accept Paypal? I really, really want one of these programmers.
I smoke my buddy on his rzr4 800 until I hit the limit then he passes me, this cannot be allowed to continue to happen.
medhatken is offline  
post #167 of 173 (permalink) Old 05-18-2015, 10:37 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
no paypal. You call to order 570-875-9071 and pay with a credit/debit card.

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #168 of 173 (permalink) Old 06-07-2015, 06:01 AM
 
HemiGene's Avatar
 
Join Date: Jun 2015
Location: Kentucky
Posts: 21
Hey VFORCEJOHN, I sold my RZR to buy a 2015 T4 and just brought her home yesterday! I'm in love!

Admittedly I'm hitting information overload while browsing this forum, but I know I need to do the fuel tank vent mod ASAP...your plug n play limiter bypass seems like a natural second mod...along with some advantageous performance increases.

I've read most of this thread and I assume since my 15 is basically the same as the 14, all this still applies?

Sorry for the newb questions, but I'm trying to get up to speed as quickly as possible

Thanks for the info!!
HemiGene is offline  
post #169 of 173 (permalink) Old 06-26-2017, 09:39 AM
 
Join Date: Jun 2017
Posts: 1
Can i still get one of these for my 2014 Teryx-4 800? if so how? I need one of these tuners.....


Cancel that i found your website sorry for the newbie mistake. ill be calling to your shop soon.

Last edited by mt49ersfan; 06-26-2017 at 09:46 AM. Reason: found web page
mt49ersfan is offline  
post #170 of 173 (permalink) Old 06-27-2017, 09:59 AM
 
Join Date: May 2017
Posts: 41
Garage
Just installed mine works awesome love it. MAKE SURE you ground the programmer as per johns instructions. Don't rush like i did nothing bad happened but moved the ground to the proper place afterwards. PS taking the center plastic console off when your snorkled is a bitch... lol
mpaulson14 is offline  
post #171 of 173 (permalink) Old 04-09-2018, 10:43 AM
 
MR.HAPPY's Avatar
 
Join Date: Jun 2013
Location: Northern IL
Posts: 254
So how fast are the 800s after adding the PCV?
MR.HAPPY is offline  
post #172 of 173 (permalink) Old 12-14-2018, 04:15 PM
 
CHIKARA's Avatar
 
Join Date: Nov 2018
Posts: 25
Garage
Question Teryx 4 2014-2016 ecu all the same?

I have a 2016 T4
wanting to get a PCV and Auto Tune.
Wondering if it will work on 2016?
CHIKARA is offline  
post #173 of 173 (permalink) Old 04-11-2020, 03:39 PM
 
Join Date: Jun 2019
Location: West Virginia
Posts: 18
Where can I get something to unhook my speed limiter on my 2015 Teryx4
Cliff304 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome