Teryx speed limiter removal - Kawasaki Teryx Forum
 39Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 173 (permalink) Old 11-07-2013, 10:51 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Eat Teryx speed limiter removal

Here's what I have to offer for speed limiter removal for all EFI teryx's 2009-2014.

These are PLUG IN UNITS. NO ECU REFLSHING NEEDED!!!!!

These are fully tunable by anyone. These are not locked tunes, you have the ability to adjust anything, any time, anywhere you want to. Fully removable and can be reinstalled to any compatible machine.


INSTALL TIP!!!! PLEASE READ THIS LINK!!!https://www.teryxforums.net/interstat...tml#post221931

MSD charge FI unit 4244v2
Power Commander V (custom unlocked to bypass factory speed limiters)


2009-2012 Teryx 2 Seat 750cc EFI

MSD charge FI 4244v2. 395.00 This "Plug In Under The Seat" Removes speed limiter, Adjustable timing, Adjustable fuel trim, Adjustable Cylinder Offsets, Adjustable Fuel Accel Feature, 10 dial selectable maps (5 are custom loadable on the new 4244v2 units)

I custom tune this for you, Plug and play. This is also fully compatible with all motor modifications, I have many of my custom dyno tuned bbk configurations and larger injector maps from 750cc to 999cc.


2013 Teryx 2 750cc Seat Unit.

With the change to the EFI ecu and wiring, this makes the MSD incompatible. But there's another option for doing all the above.

Power commander V # 17-037. 389.00 This is a bit more in-depth to install than the MSD. You will have to plug it into the injector harness, coils, and flywheel pickup sensor. There is NO cutting or splicing.

This plug in unit "unlocks" the 50 mph speed limiter in high and the 30 mph limiter in low, raises RPM limiter to 9500 rpm, This unit can individually tune each cylinder with FUEL and TIMING curves. There is the ability to add dual cylinder auto tuning with the at-300 unit, There is expansions you can use to control Nitrous, Boost, Speed sensitive fueling, Switches to select mapping, turn on and off auto tuning. There is also the PCV dash unit where you can utilize tachometer, and tune on the fly from the control unit itself.

Teryx 4 750cc 2012-2013 year models

Power commander V # 17-044. 389.00 No more will you have to do the expensive and limiting ECU reflashing to get past the Speed and RPM limiters. With this "UNLOCKED" power commander V you will have to plug it into the injector harness, coils, and flywheel pickup sensor. There is NO Cutting or Splicing. Plug it in and GO!!!

This plug in unit "unlocks" the 50 mph speed limiter in high and the 30 mph limiter in low, raises RPM limiter to 9500 rpm, This unit can individually tune each cylinder with FUEL and TIMING curves. There is the ability to add dual cylinder auto tuning with the at-300 unit, There is expansions you can use to control Nitrous, Boost, Speed sensitive fueling, Switches to select mapping, turn on and off auto tuning. There is also the PCV dash unit where you can utilize tachometer, and tune on the fly from the control unit itself.

2014 Teryx 800cc 2 and 4 seat

Power Commander V # 17-054. 389.00 I'm on top of this and it's ready to go!!! Even for the newly released 783cc versions of the popular teryx there will be No more expensive and limiting ECU Reflashing to get past the factory imposed Speed and RPM limiters. With this "UNLOCKED" power commander V install you will have to plug it into the injector harness, coils, and flywheel pickup sensor. There is NO Cutting or Splicing. Plug it in and GO!!!

This plug in unit "unlocks" the 50 mph speed limiter in high and the 30 mph limiter in low, raises RPM limiter to 9500 rpm, This unit can individually tune each cylinder with FUEL and TIMING curves. There is the ability to add dual cylinder auto tuning with the at-300 unit, There is expansions you can use to control Nitrous, Boost, Speed sensitive fueling, Switches to select mapping, turn on and off auto tuning. There is also the PCV dash unit where you can utilize tachometer, and tune on the fly from the control unit itself.

These tuners when tuned by me also can bypass DIFF LOCK LIMITER AND REVERSE LIMITER. ask how!!

Last edited by VFORCEJOHN; 02-03-2016 at 10:25 AM.
VFORCEJOHN is offline  
Sponsored Links
Advertisement
 
post #2 of 173 (permalink) Old 11-07-2013, 11:34 AM
Premium Member
 
sconym's Avatar
 
Join Date: Nov 2008
Location: Vegas!!!
Posts: 4,285
availability john?

2012 Blue T4 - LTI Long Travel with Kings - LTI cage - UTV Inc switches - FuelUTV switch panel - FuelUTV air filter - Rigid SR50 - Diablo beadlocks with SKAT paddles - 14" MSA Diesels with 29" Bighorns - Pro Armor 5pt harnesses - thats enough for now....
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
sconym is offline  
post #3 of 173 (permalink) Old 11-07-2013, 11:53 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Quote:
Originally Posted by sconym View Post
availability john?
MSD's are usually always in stock.

PC5's Should be here tomorrow. Ironic as they coming out of Mendenhall Dr in Las Vegas.
DieselDoc likes this.
VFORCEJOHN is offline  
Sponsored Links
Advertisement
 
post #4 of 173 (permalink) Old 11-07-2013, 01:13 PM
Premium Member
 
sconym's Avatar
 
Join Date: Nov 2008
Location: Vegas!!!
Posts: 4,285
Quote:
Originally Posted by VFORCEJOHN View Post
MSD's are usually always in stock.

PC5's Should be here tomorrow. Ironic as they coming out of Mendenhall Dr in Las Vegas.
yeah… they are about 15 mins from the house. it was really handy when i was jetting my 840 T2…

2012 Blue T4 - LTI Long Travel with Kings - LTI cage - UTV Inc switches - FuelUTV switch panel - FuelUTV air filter - Rigid SR50 - Diablo beadlocks with SKAT paddles - 14" MSA Diesels with 29" Bighorns - Pro Armor 5pt harnesses - thats enough for now....
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
sconym is offline  
post #5 of 173 (permalink) Old 11-07-2013, 02:08 PM
Premium Member
 
BlueDevil's Avatar
 
Join Date: Sep 2012
Location: Metcalfe, ky
Posts: 1,151
Does it unlock the diff speed limiter on the 12-13 T4's?
kids88yj likes this.

Follow me! I know where I'm going...I think.

2014 Green T4- catvos lift, 30" evo's, warn 3k winch, BDK Cage..
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


2012 blue t4- Gone
BlueDevil is offline  
post #6 of 173 (permalink) Old 11-07-2013, 03:29 PM
Premium Member
 
MIKE_D's Avatar
 
Join Date: Aug 2013
Location: Russell Springs KY
Posts: 420
Quote:
Originally Posted by BlueDevil View Post
Does it unlock the diff speed limiter on the 12-13 T4's?
Yeah what he said...

Shipping to 42642?
MIKE_D is offline  
post #7 of 173 (permalink) Old 11-07-2013, 03:44 PM
 
OKFORCE's Avatar
 
Join Date: Nov 2013
Location: Davis,ok
Posts: 39
I want one. How much?
OKFORCE is offline  
post #8 of 173 (permalink) Old 11-07-2013, 04:01 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
YES!!! These tuners have the ability to bypass differential lock!!!!

I know how to do it. No problem.
DieselDoc and angussprings like this.

Last edited by VFORCEJOHN; 02-03-2016 at 10:27 AM.
VFORCEJOHN is offline  
post #9 of 173 (permalink) Old 11-07-2013, 04:04 PM
Premium Member
 
MIKE_D's Avatar
 
Join Date: Aug 2013
Location: Russell Springs KY
Posts: 420
When will these be available? I see MANY sales in your future.
MIKE_D is offline  
post #10 of 173 (permalink) Old 11-07-2013, 04:05 PM
 
kids88yj's Avatar
 
Join Date: Sep 2013
Posts: 89
Quote:
Originally Posted by MIKE_D View Post
When will these be available? I see MANY sales in your future.
I second that I want one.

Sent from my SPH-L710 using Tapatalk 2
kids88yj is offline  
post #11 of 173 (permalink) Old 11-07-2013, 04:35 PM
Premium Member
 
Join Date: Feb 2012
Location: palmer , ak
Posts: 481
Quote:
Originally Posted by bluedevil View Post
does it unlock the diff speed limiter on the 12-13 t4's?
unlocking or raising the 12mph diff lock limitier for my 2012 t4 is a must!!!! I feel im not the only one that wants this raised or turned off. Hill climbing and only having 12mph is what troubles me and leaves me stuck

2012 T4 LE HL 2" LIFT 26.5 X 12 SKINNY/WIDE COMBO PITBULL ROCKER XOR UBER ROCKER TIRES ON STEEL OEM WHEELS, KAWI HALF WINDSHIELD, FULL 1/2" FACTORY UTV UHMW SKIDS, SUPERWINCH TERRA 45 WINCH, VISION X LIGHTS, GARAGE PRODUCTS FULL BUSHING KIT KAWI REAR BOX, KAWI A ARM GUARDS,KAWI REAR BUMPER, DAYSTAR JEEP SWITCH PANEL WITH UTV INC SWITCHES
wilynick is offline  
post #12 of 173 (permalink) Old 11-07-2013, 05:43 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Quote:
Originally Posted by MIKE_D View Post
When will these be available? I see MANY sales in your future.
I'll have more in Friday afternoon. and that's TOMORROW!!!
MIKE_D likes this.
VFORCEJOHN is offline  
post #13 of 173 (permalink) Old 11-07-2013, 05:45 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Quote:
Originally Posted by wilynick View Post
unlocking or raising the 12mph diff lock limitier for my 2012 t4 is a must!!!! I feel im not the only one that wants this raised or turned off. Hill climbing and only having 12mph is what troubles me and leaves me stuck
I can bypass the limiters with no issues. Plug it in and go.

Last edited by VFORCEJOHN; 02-03-2016 at 10:27 AM.
VFORCEJOHN is offline  
post #14 of 173 (permalink) Old 11-07-2013, 05:49 PM
Premium Member
 
BlueDevil's Avatar
 
Join Date: Sep 2012
Location: Metcalfe, ky
Posts: 1,151
I'm pretty sure it's 10 mph on the 12-13's for diff lock and reverse.

Follow me! I know where I'm going...I think.

2014 Green T4- catvos lift, 30" evo's, warn 3k winch, BDK Cage..
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


2012 blue t4- Gone
BlueDevil is offline  
post #15 of 173 (permalink) Old 11-07-2013, 05:54 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
on the 14 I have it's 15 mph where it's limiting me to. My custom tuner will bypass the limiter to allow 40 mph in difflock


anyone with a 2014, what's the stock cutoff for the diff lock? I think it was 12-15? I don't remember as mines removed.

Last edited by VFORCEJOHN; 02-03-2016 at 10:28 AM.
VFORCEJOHN is offline  
post #16 of 173 (permalink) Old 11-07-2013, 05:55 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Reverse limiter, I can remove that no issue. Works similar to the diff lock setup..
slick81 likes this.

Last edited by VFORCEJOHN; 02-03-2016 at 10:29 AM.
VFORCEJOHN is offline  
post #17 of 173 (permalink) Old 11-08-2013, 12:04 PM
 
kids88yj's Avatar
 
Join Date: Sep 2013
Posts: 89
Sweet. YOU THE MAN.

Sent from my SPH-L710 using Tapatalk 2
kids88yj is offline  
post #18 of 173 (permalink) Old 11-08-2013, 12:52 PM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
I did get all the PCV tuners in today. However I am not going to have time enough to program them all up and call everyone. I'm out of time today. I managed to get 5 of them done, I still have 10 more to do.

so If you sent me your name and number to purchase, you'll be hearing from me over the weekend.

John

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #19 of 173 (permalink) Old 11-12-2013, 07:35 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Tuners are ready to go!!

get them while they last!!

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #20 of 173 (permalink) Old 11-12-2013, 09:28 AM
 
slick81's Avatar
 
Join Date: Jun 2012
Location: Indiana
Posts: 440
Any word on the different lock limiter.

Sent from my SCH-I545 using Tapatalk
slick81 is offline  
post #21 of 173 (permalink) Old 11-12-2013, 09:35 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
well...what I tried didn't work for the diff lock. I still have more messing around to do. I think I'll be able to get it off, but it may require a simple home made module which triggers a relay. The ground signals the ECU to limit the speed. so I have to isolate it so the diff lock still engages and doesn't tell the ECU to limit speed after that.

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
post #22 of 173 (permalink) Old 11-12-2013, 10:51 AM
 
LudicrousSpeed's Avatar
 
Join Date: Oct 2013
Location: Southern Illinois
Posts: 1,259
Just another thing to add to the list!

2013 Yellow T-4 EPS LE
Kolpin full W/S, TUFF LED 4" square lights, Sirius 50"LED lightbar, LED backup lights, STI HD beadlocks with Slickcoat, 27" Roctane XD, Viper 5k WS winch, JBS floor protection, LED turn signals, Hella Horns, Denali 72" Plow, Fuel UTV Switch panel, Custom overhead 4 speaker stereo console
LudicrousSpeed is offline  
post #23 of 173 (permalink) Old 11-12-2013, 02:47 PM
 
thumper400's Avatar
 
Join Date: Feb 2010
Location: San Diego, Ca
Posts: 859
If our ECU on a Teryx 4 was already reflashed will this just override it or do we need to get ours back to stock?

Teryx4 EPS
Black Rhino cage, Kawi LED's, Rigid SR50, Rigid Dualy D2's, Muzzy Pro pipes, ECU reflash, STI beadlocks, Hiper beadlocks with Skat trak's , Funco +6 LT with King's
thumper400 is offline  
post #24 of 173 (permalink) Old 11-12-2013, 08:10 PM
 
just4fun's Avatar
 
Join Date: Mar 2013
Location: Baytown TX
Posts: 70
Interested on diff and rev limiter also

2012 Tyrex Camo, 5000lb Viper Winch, High Lifter Kit, 30x10x14 Interforce 14x7 STI HD3 Wheels , 21" light bar, Jensen MS30, 6 1/2" Cadence Speakers
just4fun is offline  
post #25 of 173 (permalink) Old 11-13-2013, 09:10 AM Thread Starter
 
VFORCEJOHN's Avatar
 
Join Date: Jun 2008
Location: BARNESVILLE, PA
Posts: 1,121
Quote:
Originally Posted by thumper400 View Post
If our ECU on a Teryx 4 was already reflashed will this just override it or do we need to get ours back to stock?

If the ECU was reflashed. You can sell or swap it to another unit to recoup some coin and install this.... OR just install this with the ECU reflash ****I NEED TO KNOW IF YOUR ECU WAS REFLASHED AS FI and TIMING MAPPING IS DIFFERENT***

this will override all reflash settings besides fuel and timing that was changed during the reflash. so you still get all the limiters off either way wether you have a reflash or you don't

VFORCEJOHN SELLS EXHAUSTS, TUNERS, CLUTCHING, DYNO SERVICE. CALL 570-773-1240 or EMAIL:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


VFJ has the Performance goodies for all your Teryx needs. Speed, Diff, RPM Unlocking tuners... Full custom clutching setups for MAX underdrive and overdrive... Full Stainless dual exhaust systems.
VFORCEJOHN is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome