Kawasaki Teryx Forum banner

KRX Accessories from SuperATV

10K views 45 replies 7 participants last post by  SuperATV 
#1 ·
See less See more
4
#4 ·
Hey man!
We don't have a receiver hitch for the KRX yet. We're designing a rear brush guard with a receiver hitch built into it, but I don't have a good date on it yet. It would be a couple months before they're ready. Still in the design stage. I didn't see just a solo receiver hitch on the list, but I'll check to see if its in the plans down the road.
 
#3 ·
I'm thinking a 2" receiver would work better than the tow hook looks like it has two places for safety chains that would work for tie down points
 
  • Like
Reactions: BobX2
#10 ·
Anybody know... I'm not sure the superatv 2" receiver hitch will work with the OEM rear bumper the bumper uses the same bottom 2 bolts & runs up the sides
 
#18 ·
Rear Windshield

I got interested in the rear windshield, but, when I read the installation instructions, it states that it is not recommended to leave it on when trailering on an open trailer. I don't want to have to keep taking it off and on.

A drop down tailgate would be a definite plus on these higher machines.
 
#20 ·
I got interested in the rear windshield, but, when I read the installation instructions, it states that it is not recommended to leave it on when trailering on an open trailer. I don't want to have to keep taking it off and on.

A drop down tailgate would be a definite plus on these higher machines.
We say that as a precaution, and we have to protect our butts if anything crazy should happen. Its always safer to do...but, in reality we know you're going to do it anyway.

It sounds like a drop down gate would be in high demand. I do not believe anyone is offering one yet. You could be the first! :icon_thumleft:
Sounds like that could be a winner! I fired this on to the designers and shop guys. :wink It wouldn't be an immediate change, but it totally makes sense because that bed is already pretty high.
 
#26 ·
Easy fix! Put a latch at the top where it bolts on with the 2 bolts, hinge the bottom and figure out some sort of latch release and presto! Opening "bed enclosure"! Although I would consider adding some kind of metal mesh (or even solid plate) to it to help hold in loose items (like little furry friends!) :icon_thumleft:

Just give me 40% off my next purchase to cover my R&D help. :rofl2:
 
#27 ·
Couldn't get better advertising than that
Sounds like a good idea to me Hawk
Hey Superatv (hint...hint)
See we're all in this together here's a pict of the KRX bumper
 

Attachments

  • Like
Reactions: SuperATV
#29 ·
Thanks again ok I'm checking it out now
Now you need to draw up some plans for a front receiver just like that one & a mount for a good winch & wireing plug ins for a front & rear winch swap (how a bout that Hawk hint hint) we know how to hook it all up🤠🇺🇸🏁
 
  • Like
Reactions: VirginiaHawk
#33 ·
SUPER Please make some good drain plugs in floorboards??? Probably sell a bunch....copy the RZR?
 
#36 ·
That is not strictly about going deep and swimming swamps)

Rad relocation and snorkel kit is a MUST if you want to rip the trail with mud and dirt holes and enjoy it w/o overheating( the forest dirt and mud immediately clogs the radiator from the first hit of the pretty deep hole making the rest of a trail a real pain- trying to clean the radiator on the run leads to inevitable fins damage etc)
Leaving the running UTV in the mud (to have a look around, to get a winch out) even with a top location for CVT in/out results in water chilling the hot diffs and gearbox creating a negative pressure inside the cases and forcing water inside- with these pricey negative results
Thats why I and all owners taking care of their machines would be happy with a tubing and accessories set to properly vent all the necessary parts to the top. Remember , these 6 months the dealer takes care of the water hear and there covered by the warranty gonna come to an end fast and repair cost for this new UTV are really huge
 
#37 ·
? Never had that kind of issue personally. An outerwear on grill in front of rad. does help a lot... I feel KRX is snorkeled pretty well stock.
 
#39 ·
KRX Frame Stiffener! https://www.superatv.com/kawasaki-teryx-krx-1000-frame-stiffener

Beef it up now, so you don't have to deal with it later.

Features
Made of 5 mm heavy-duty steel plating
Strengthens your KRX’s frame
Saves your frame when you add heavy tires or other unsprung weight
Adds support and stability
Powder coated for durability

 
#43 ·
Lol! 🤣🤣🤣 Still in the prototype phase...

33" tire with lift??? I thought ya can run those already without lift kit??? Honestly krx sits pretty high already and little preload adjustment would easily gain another 1" I think? Dunno.. SUper what size tire fits krx in stock form??
Well...you know we have to be conservative. There is a possibility of getting some rub at absolute full compression and full turn, so that's what we have to record. I know guys that are running 35"s stock with no problem, but the chance is there...so we protect our butts and write it down.
 
#42 ·
33" tire with lift??? I thought ya can run those already without lift kit??? Honestly krx sits pretty high already and little preload adjustment would easily gain another 1" I think? Dunno.. SUper what size tire fits krx in stock form??
 
#45 ·
KRX 1000 Full Skid Plate
https://www.superatv.com/kawasaki-teryx-krx-1000-full-skid-plate


Features

Uses abrasion and break resistant 1/2” proprietary ARMW material
Bolts fit flush to skid plate for smooth surface
Full front to back protection
Laser scanned and CNC cut for a perfect fit
Drain ports make cleanup easy
 
#46 ·
KRX High Clearance 1.5" Forward Offset A-Arms
https://www.superatv.com/kawasaki-teryx-krx-high-clearance-1-5-forward-offset-a-arms





FEATURES
1.5” forward offset
Fit up to a 34” tire
Made with 1.25” diameter steel tubing
High-clearance bends give you extra ground clearance without a lift
Chromoly steel ball joint housings and pivot blocks
Steering stops included
UV-resistant powder coat finish
Backed by a lifetime warranty
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top