Kawasaki Teryx Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Looking to upgrade my tires and wheels to Tusk Racing Four 28x10-14 Tusk TERRABITE Heavy Duty 8-Ply Radial DOT UTV Tires mounted on Tusk CASCADE Wheels over my stock tires and wheels. Got some questions.
Can I run these on both front and back?
Will I need spacers or 2" lift kit
Guesstimate on speedometer difference. If any at all?
Appreciate any feedback.
 

·
Premium Member
2016 Teryx2, 2011 Brute Force, 2008 Vulcan Classic 1500
Joined
·
1,618 Posts
Q: Can I run these on both front and back?
A: Yes

Q: Will I need spacers or 2" lift?
A: Spacers will not be needed if your backspacing is correct. You can probably run 28"s without a lift, but I do recommend you install one anyway to improve clearance.

Q: Guesstimate on speedometer difference If any at all?
A: About 3mph difference. In my case, it actually fixed my inaccurate speedo.
 

·
Sep 2020 TOTM Winner
Joined
·
595 Posts
What machine do you have? If you have an S model then you don't need any mods at all to the run 28's, just be aware of the offset when ordering your wheels. As mentioned, if you have a non S model you are going to want a bracket lift. The terrabites do run a little small, so you could be ok without the lift, but you may still get some rubbing on the recall plate at full left turn. I run the Brute Performance bracket lift at around 1.5" of lift or so (lift height controlled by preload adjustment).
 
1 - 4 of 4 Posts
Top