Kawasaki Teryx Forum banner

axel boots

2K views 3 replies 3 participants last post by  joe731 
#1 ·
Has anyone had to replace a cv boot? How hard is this to do? I need to replace two!
 
#4 ·
I changed the outer boot on my teryx. You have to pull the axle, remove the inner joint, and slide the new outer boot on. The clamps are reusable so don't cut them off. I did not need any special tools. Just push in on the axle and give it a tug and it will come out. Good luck.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top