Kawasaki Teryx Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1 (Edited)
Just finsihed installing back up lights, EMP Bumper, EMP Bed Rails. While I had everything apart I had the bed, Rails, and the Bumper coated with Armacoat (Spray Bedliner). I really like the EMP Bumper, I did not like the mounting screws (self drilling/taping). Instead of using these screws I drilled four holes through the 1 " Square tubing that is attached (supports) to the bed. I then installed four 1/4 20 stainless bolts, washers and locking nuts on each side. The EMP Bracket is plenty strong, I just found the self taping screws to be unreliable for tightening.

My neighbor milled a rectangular hole over top of the two (center) round holes originally in the bumper. This made for a perfect place to mount the back up lights.
 

·
Registered
Joined
·
813 Posts
Looks great,like the way you line-exd the bed sides also.
 
1 - 2 of 2 Posts
Top