[se3388]

I am looking for a winch mount that positions the winch higher and was told by everyone on here that the Super ATV mount is the one I want but when I go to their site and put in my machine info it says No Product found and when I do get that mount to come up it says in red letters "Does not fit your machine". I called them and a very nice Lady said the mount # WM-K-TRX4 is what they have, but haven't tested it on the 2022 models. Does anyone know if it works on the 2022 Kawasaki Teryx S LE (2 seat version)? Thanks for any clarification. The wheels may turn slow but they do still turn, I think.

Steve...........

 

[lscmark]

I just used it with a Badlands 5000 lb on my 22. I had to slot the plate to frame holes a bit to raise it about 3/8", the bumper was up against it. So yes-it works, but in hindsight I would test fit the mount with fairlead on it and the bumper before bolting your winch to the plate. Hope this helps..

 

[se3388]

I have a Badlands ZXR 5000 to go on it when I get the mount. Looks like I'll order that mount. Thanks for the info.

Steve............

 

[Atoned4]

I am looking for a winch mount that positions the winch higher and was told by everyone on here that the Super ATV mount is the one I want but when I go to their site and put in my machine info it says No Product found and when I do get that mount to come up it says in red letters "Does not fit your machine". I called them and a very nice Lady said the mount # WM-K-TRX4 is what they have, but haven't tested it on the 2022 models. Does anyone know if it works on the 2022 Kawasaki Teryx S LE (2 seat version)? Thanks for any clarification. The wheels may turn slow but they do still turn, I think.

Steve...........

That is the mount I used on my 2022 Teryx4 S and works great!

 

[SuperATV]

I am looking for a winch mount that positions the winch higher and was told by everyone on here that the Super ATV mount is the one I want but when I go to their site and put in my machine info it says No Product found and when I do get that mount to come up it says in red letters "Does not fit your machine". I called them and a very nice Lady said the mount # WM-K-TRX4 is what they have, but haven't tested it on the 2022 models. Does anyone know if it works on the 2022 Kawasaki Teryx S LE (2 seat version)? Thanks for any clarification. The wheels may turn slow but they do still turn, I think.

Steve...........

Hey! Sorry about that. We are still working on that "my fitment" software, where you plug in your model/year and get parts.

Our winch mount will definitely fit your winch. Here's a link: https://www.superatv.com/kawasaki-teryx-winch-mounting-plate
Shoot me a PM if you're ready to pull the trigger, and I'll get you a little forum member discount.

 

[se3388]

Thanks, got a winch plate and windshield on it's way, SuperATV is one heck of a place to do business with, wish I would have found them sooner.

Steve..........

 

[SuperATV]

Thanks, got a winch plate and windshield on it's way, SuperATV is one heck of a place to do business with, wish I would have found them sooner.

Steve..........

Thanks man! Feel free to call us or give me a shout here whenever you need anything.

 

[Chasin Whitetails]

The SATV mount bolted to my 22 S LE perfect except... When mounting the upper side plates, the right side bolts did not line up with the mounting plate. Had to grind a half of a hole to slot the bracket to get it bolted flat. When I mounted my Badlands 5000, the fairlead that comes with the Badlands (roller type) would not bolt up. I had to slot both mounting holes on the SATV mount. As the SATV fairlead that comes with the mount has very sharp edges, please look at a different fairlead for your set up.

 

[huntertim214]

The SATV mount bolted to my 22 S LE perfect except... When mounting the upper side plates, the right side bolts did not line up with the mounting plate. Had to grind a half of a hole to slot the bracket to get it bolted flat.

I had this same issue with the SATV mount on my 2019 T4 LE, had to drill out the hole to make the bolt fit on the side. But I do love the set-up.

 

[Atoned4]

The SATV mount bolted to my 22 S LE perfect except... When mounting the upper side plates, the right side bolts did not line up with the mounting plate. Had to grind a half of a hole to slot the bracket to get it bolted flat. When I mounted my Badlands 5000, the fairlead that comes with the Badlands (roller type) would not bolt up. I had to slot both mounting holes on the SATV mount. As the SATV fairlead that comes with the mount has very sharp edges, please look at a different fairlead for your set up.

My fairlead that came with the mount was smooth. I heard someone else say that theirs was sharp (or maybe it was you in another thread), so I was expecting to have to buy another one.

 

[se3388]

Got my SuperATV winch mount installed and the Badlands 5000 on it as well. Mount fit great and was easy to install.I did have to slot the bumper mounting holes just a very small amount which gave about 1/8th inch clearance between it and forward edge of the winch mounting plate. I am going to put some gussets on the bracket that the fairlead mounts to as I have heard story's about them bending or tweaking under some conditions.

The SuperATV flip up windshield was a breeze to install, I wish I would have know about this windshield a few machines ago. It works great and is pretty sturdy. SuperATV hit a home run with both of these products. Keep up the good work guys.

Steve............

 

[Atoned4]

Got my SuperATV winch mount installed and the Badlands 5000 on it as well. Mount fit great and was easy to install.I did have to slot the bumper mounting holes just a very small amount which gave about 1/8th inch clearance between it and forward edge of the winch mounting plate. I am going to put some gussets on the bracket that the fairlead mounts to as I have heard story's about them bending or tweaking under some conditions.

The SuperATV flip up windshield was a breeze to install, I wish I would have know about this windshield a few machines ago. It works great and is pretty sturdy. SuperATV hit a home run with both of these products. Keep up the good work guys.

Steve............

Nice! Are the gussets going to be welded on?

 

[se3388]

For sure.

Steve........

 

[se3388]

Everything has gone well with the install until I got to the fairlead bracket, I welded some gussets on the side which greatly provided more rigidity. I scooted the fairlead bracket out as far as the mounting holes will allow but the cable will rub across the bottom edge of the fairlead bracket opening. I'm thinking I will try to put a bevel on the bottom opening of the fairlead bracket.

Steve.........

 

[huntertim214]

The gussets are a good idea, the fairlead mount is pretty "flexy". I haven't bent mine, even while plowing snow for 2 winters, but it does flex a lot and I could see it happening.

 

[se3388]

It did stiffen up the fairlead bracket but the cable would rub on the bottom rear of the opening of the fairlead bracket before the cable ever got to the bottom roller. I cured that by drilling the mounting holes a little lower on the fairlead itself. It might make the fairlead itself flex a little more but I don't think it will hurt under 'normal' pulls.

Steve..........

 

[migelmiles]

Apps that have not been built for cross-platform can be very expensive mlsdev.com/blog/healthcare-mobile-app-development . Re-engineering the app can require significant costs. Many assumptions made during the original development don't apply to other platforms. Cross-platform decisions are based on user experience, cost analysis, and customer base. It is important to consider all of these factors when looking for an app development company. If you are planning to create an app for several platforms, look for a cross-platform development company.

 

[se3388]

What does that have to do with the subject matter and what the heck does it mean?

Steve...........

 

[Atoned4]

What does that have to do with the subject matter and what the heck does it mean?

Steve...........

He just started spamming multiple threads

 

[se3388]

I'm sorry, I forgot about not feeding them. LOL.

Steve...........