Kawasaki Teryx Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter #1
I would like to install a radiator fan switch on my dash but want it wired basically as an over ride switch so that if it is flipped on the fan runs and if it is flipped off then the fan works normally as if from the factory. Anyone know how to do this?
 

·
El Moderator
Joined
·
4,038 Posts
Use a single pole double throw switch:

L1----O
O---- Common
L2----O

Pull white wire off of radiator breaker and connect to L1. Crimp another wire onto blue wire connector of radiator fan switch and connect to L2. Common would be connected to white wire (12V) out of the radiator fuse (spliced between fuse and breaker). So when switch is up, circuit is "normal"; when down, you've jumped across the temp switch and apply 12V to the fan (fan on). This keeps all your fuses and breakers functional for safety.:devil3:
 
1 - 3 of 3 Posts
Top