Kawasaki Teryx Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
What tire pressure are you all running in 8 ply tires? Specifically looking for input on the Blackwaters, but will take other 8 ply suggestions. 28s on 14in wheels, 9 wide in the front and 11in wide in the rear.
The stock pressure was ok for the Bighorns (12F / 16R), but maybe a little high. I started there with the new tires but it is too much. I am at 10F and 13R, but still seems too high, maybe.
How low can you go with an 8 ply on a non-beadlock wheel? Seems like 5 would be low with as heavy as these things are. We ran 2 or 3 psi with 6-ply tires on the racing quads, but they only weigh 400 lbs.

Any input would be appreciated.
 

·
Registered
Joined
·
271 Posts
I used to run 11psi on the stock Bighorns on 12 inch wheels. I am now running 9psi on 28x10r/14 Carnivores. Seems about right for the terrain I am in. The ride has definitely improved which is saying a lot for a 2014 T2. They rode like a tank to start with.
 

·
Premium Member
Joined
·
2,122 Posts
I run 10 PSI in my 28x10x12 Blackwater Evo's.
 
1 - 4 of 4 Posts
Top