Kawasaki Teryx Forum banner

1 - 18 of 18 Posts

·
Premium Member
Joined
·
46 Posts
Discussion Starter #1 (Edited)
Thought I would start a build thread. Not sure how much I will be doing, but I am sure this will be like anything else an addictive sickness...

This is our first SXS, been around ATVs and 4x4s all my life, needed another hobby :devil3:

Bought it in April. The pup only got to ride in it a couple times, gonna miss my helper: RIP buddy.
 

Attachments

·
Premium Member
Joined
·
46 Posts
Discussion Starter #2
Added the Premium Roof and the Tusk Quiet-Glide Skid plates. I don't really like how the skids pushed the front bumper out a little which extended the recovery point bolts. I didn't see a way around this. It is probably fine, but I might add some kind of spacer.
 

Attachments

·
ROCKSOFFROAD
Joined
·
1,435 Posts
Good thread keep up the good pics 👍
Seems like someone had to cut some off or something to make that skid fit
They'll have to chime in
 

·
ROCKSOFFROAD
Joined
·
1,435 Posts
Those are nice skids good thick coverage
 

·
Premium Member
Joined
·
46 Posts
Discussion Starter #8 (Edited)
what rearview mirror is that? Do you like it so far?
It is the Kawasaki lighted wide angle mirror. I like the wide angle view, not sure it is worth $130.00, but it came on mine.... The lighted portion is a small, removable part in the center that acts as a flashlight. It takes 4 AAA batteries, kinda cool idea. When it is in the mirror, you can still push the button and you have a LED that lights up the dash and center console.

https://www.kawasaki.com/accessories/item/lighted-wide-angle-rear-view-mirror/999941318
 

·
Registered
Joined
·
2 Posts
Thank you Sir. I have a siezmik rearview and while the optics and spread are good it seems to wander... Just tried the 3m double sided heavy duty tape, so we'll see how that goes. With the warranty they claim to provide, i'm sure i'll get fixed up, but was curious incase i need to try elsewhere. Don't care about the light but the size and high mount look nice.
Thanks for the reply.
 

·
Premium Member
Joined
·
46 Posts
Discussion Starter #10
Thank you Sir. I have a siezmik rearview and while the optics and spread are good it seems to wander... Just tried the 3m double sided heavy duty tape, so we'll see how that goes. With the warranty they claim to provide, i'm sure i'll get fixed up, but was curious incase i need to try elsewhere. Don't care about the light but the size and high mount look nice.
Thanks for the reply.
Just installed the Seizmik side mirrors today. Seem pretty stout and good clarity, they make some good stuff.
 

Attachments

·
Administrator
Christ is King
Joined
·
4,139 Posts
Your KRX is looking good. Enjoy!
 
  • Like
Reactions: MtnAddict

·
Premium Member
Joined
·
46 Posts
Discussion Starter #15
Gees !!! They look huge good drainage though . How big did u cut the hole in the floor?
I couldn't get a good picture. They are the same size as the stock ones. The stock ones had no drainage, they were solid rubber that you had to pry out each time. I removed those, and the new ones fit in place with screws.
 

·
Registered
Joined
·
1 Posts
I couldn't get a good picture. They are the same size as the stock ones. The stock ones had no drainage, they were solid rubber that you had to pry out each time. I removed those, and the new ones fit in place with screws.
where ARE the floor drains???? I can’t get anything to drain.
 

·
Premium Member
Joined
·
46 Posts
Discussion Starter #18
They are on drivers (left side) and passenger (right side) floorboards. The stock ones are round solid rubber that you have to pry out to drain.

Not my video:

 
1 - 18 of 18 Posts
Top