Kawasaki Teryx Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I am new here and looking for help. I have a 2011 Teryx. The parking brake is not on, but the display says "P". I have taken the switch off of the parking brake pedal and tried cleaning, bypassing, and jumping the switch. The computer still thinks the parking brake is set and will only run in limp mode.
Is there another sensor or switch somewhere that I am not seeing. It almost acts like a bad connection somewhere. The display will sometimes start flashing from "P" to speedo rapidly then just go back to "P". Thank you. Any input will be greatly appreciated.
 

·
Registered
Joined
·
1 Posts
Ever get this problem resolved? I am having the same problem after installing some snorkels. Put the middle trim back in and the parking break says it is still on.
 
1 - 2 of 2 Posts
Top