Kawasaki Teryx Forum banner

1 - 16 of 16 Posts

·
Premium Member
Joined
·
2,400 Posts
Discussion Starter #1
Here is a sneak peak at the brand new Dasaracing Teryx pipes. These are just in the prototype and fitment stages. Nothing is final. We will be changing them and adjusting them on the dyno to extract the most hp we can ......


TERYX DASA #2.jpg

TERYX DASA #4.jpg

TERYX DASA.jpg
 

·
Premium Member
Joined
·
2,102 Posts
Projected pricing? OD of BBK exhaust pipe may be? Same length pipes?
 

·
Premium Member
Joined
·
2,400 Posts
Discussion Starter #5
Projected pricing?
Well Retail price of $959.99 ...... internet discounted price $859.99 or so. Again nothing is set in stone. You can ask anyone around about the quality of the Dasa pipes. They not only make HP , but look good doing it. They will be WLL WORTH the extra couple bucks. THese wont be mig welded slap on deals. All Dasa pipes are FULL stainless and tig welded here in the USA.


OD of BBK exhaust pipe may be? Same length pipes?
They will be same length pipes. As far as sizes go nothing is final till we do dyno runs and settle on a final design. You can see in the phots the size of the cores and pipes .... they are ALOT larger then the muzzy all the way around.
 

·
Premium Member
Joined
·
2,400 Posts
Discussion Starter #11
Not many people that like to share those numbers Don! :popcorn:

Ohh we have no isseus with sharing that info ...... ONCE we have the final design done. After all it will be easy to find out once we start selling the pipes right? :icon_thumleft:
 

·
Premium Member
Joined
·
2,400 Posts
Discussion Starter #14 (Edited)
Here is a photo of our head pipe flange ...... on the right side and the muzzy head pipe flange ..... on the left side. The muzzy head pipe flange is like what you will see on most head pipes. It is very thin and will bend very easy. Plus on the muzzy pipes we got the head pipe flange would not go on. The holes were off center and had to be drilled out. You can also see that the pipe diameter on the Dasa pipes starts out alot bigger right out of the head.

DASARPIPEFLANGE.jpg

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
 

·
Premium Member
Joined
·
2,400 Posts
Discussion Starter #16
Right now we are making about 8 HP over stock, 6 HP over the stock pipe with the baffle out and 1 HP ACROSS THE BOARD over the muzzy duals. We will be doing some more testing at the end of the month on a 2009 with a 840 kit. This is where we are going to see some real gains over the other pipes. We wanted to offer a pipe that makes great numbers on a stock car and then REALLY SHINES on a big bore or modded teryx. That way you can use this pipe from the start to the finish of your build without having to worry about getting another pipe.

DASA RACING WORLD CHAMPIONSHIP WINNING MOTORS AND SERVICE
 
1 - 16 of 16 Posts
Top